Can't update Ikea Styrbar 1.0.024 to latest version

[drumstick77]

What happened?

I've tried following the instruction on this link --> #18515 (comment), (following update from jkl1337 but the link to download the OTA 2.4.5 doesn't seems to be working. --> http://fw.ota.homesmart.ikea.net/global/GW1.0/01.20.065/bin/10078031-zingo_kt_styrbar_remote-2.4.5.ota.ota.signed
Can anyone please help? Thanks

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.40.0-1

Adapter firmware version

20211217

Adapter

sonoff

Setup

Home Assistant

Debug log

No response

[drumstick77]

Anyone please? Thanks

[LeeWiu]

Right click on the link then Save Link As

[drumstick77]

Thank you. I've progressed further now. So I'm following this instruction

but with the latest update on Z2M, there's already a line for external_converters:[] at the very top, so when I added external_converters on the very bottom of confirmation.yaml, it naturally flagged duplicate.
so I removed the external_converters line on the bottom but add on fails to start.

[drumstick77]

Anyone please? I'm still stuck and everytime Z2M gets updated, HA moans. please help. thanks

[github-actions]

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days

[thomasaarholt]

I was able to update from 1.0.024 to 2.4.5 by tapping buttons on the ikea remote while pressing the update option on Z2M / OTA. The intention behind the tapping is to keep the remote "alive" since it is a battery powered device. I am using the standard Z2M config, no external converter.

[thomasaarholt]

I was then able to update from 2.4.5 to 2.4.16 by doing the same thing again.

[chaosmonkey2]

I was able to update from 1.0.024 to 2.4.5 by tapping buttons on the ikea remote while pressing the update option on Z2M / OTA. The intention behind the tapping is to keep the remote "alive" since it is a battery powered device. I am using the standard Z2M config, no external converter.

Worked just fine. Thanks for the great advice!

[thomasaarholt]

Great! If you have trouble with the actions not working in Z2M, then checkout this comment: #25505 (comment)

You can either turn on legacy support or update to the new way of doing it. I haven’t tested either yet, I’m currently using ZHA.

[github-actions]

This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days