Pedalino with 15 footswitch to Ampero Stomp II

[regisampa]

Good morning my friends.

Finally I managed to build my Pedalino Mini to control my Ampero Stop II. The possibilities are countless.

There are 15 footswitches in a 263mm by 183mm ABS box purchased on Aliexpress.

I really liked the result.

Hugs

[upgrader-dev]

Awesome congratulations. How did you mount the board on the ABS case? Can you send pictures of the inside to see how you managed all these wires?

[regisampa]

Hi.

For now I installed the board with double-sided tape at the bottom of the box and it is well fixed, I used five buttons as ladder in a vertical configuration so I can activate the command of buttons simultaneously, I wouldn't be able to use buttons simultaneously if the ladder configuration was on horizontal.

Thanks.

[dimarzio49]

Hello. I also assembled a controller for Ampero Stomp 2. Only with 6 buttons. I have a question. You use the Toggle CC command to control slots or turn a tuner or looper on/off. If yes how did you do it. I can't find the Toggle SS combination. Firmware 3.5

[regisampa]

Hi my friend.

To access a specific preset I use (Action 1: ON: Press, Send: Control Change, Control: 1, Chanel: 1, CC: 0, Value 1 / Action 2: ON: Press, Send: Program Change, Control: 1, Chanel: 1, PC: 27) in this example I access PRESET A53-2.

To activate the tuner I created a sequence (Sequence 1 / Line 1, Send: Control Change, Chanel: 1, CC: 60, Value: 127, LED: Default, / Line 2, Send: Control Change, Chanel: 1, CC: 60, Value: 0, LED: Default) Then I created a control (ON: Press, Send: Step bt Step, Control: 21, Sequence: 1, Step: 1, Tag 1 Value 0, Tag 2 Value 127), this way the tuner activates and deactivates when I press the pedal.