uncrustify.cfg

#
# xnu code style: uncrustify configuration
#

# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
disable_processing_cmt          = "BEGIN IGNORE CODESTYLE"         # string

# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
enable_processing_cmt           = "END IGNORE CODESTYLE"         # string

# --- M1 ---
indent_with_tabs        = 0
#   How to use tabs when indenting code
#   0=spaces only
#   1=indent with tabs to brace level, align with spaces (default)
#   2=indent and align with tabs, using spaces when not on a tabstop

# --- M2 ---
indent_columns          = 4
#   I prefer 4 spaces per indentation level.

indent_continue         = 4
#   The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
#   For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.
#   negative value are OK.

# Setting this to false doesn't align params under the open param; it uses the continuation indent (indent_continue)
# from above, using spaces (which is what we want for M2).
indent_func_call_param  = False
#   True:  indent continued function call parameters one indent level
#   False: align parameters under the open paren.

# The value of the indentation for a continuation line is calculate differently if the line is:
#   a declaration :your case with QString fileName ...
#   an assignment  :your case with pSettings = new QSettings( ...
# At the second case the option value might be used twice:
#   at the assignment
#   at the function call (if present)
# To prevent the double use of the option value, use this option with the value 'True'.
# True:  indent_continue will be used only once
# False: indent_continue will be used every time (default).
use_indent_continue_only_once   = True

indent_paren_nl         = False
#   If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)

# --- M3 ---
align_keep_tabs         = False
#   Whether to keep non-indenting tabs

align_with_tabs         = False
#   Whether to use tabs for aligning

# --- M4 ---
nl_start_of_file        = Remove
#   Add or remove newlines at the start of the file

nl_end_of_file          = Force
#   Add or remove newline at the end of the file

nl_end_of_file_min      = 1
#   The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')

# --- M5 ---
nl_fdef_brace           = Force
#   Add or remove newline between function signature and '{'

# --- M6 ---
indent_class                    = True
#   Whether the 'class' body is indented.

# --- M7 ---
mod_full_brace_do       = Force
#   Add or remove braces on single-line 'do' statement

mod_full_brace_for      = Force
#   Add or remove braces on single-line 'for' statement

mod_full_brace_function = Force
#   Add or remove braces on single-line function definitions. (Pawn)

mod_full_brace_if       = Force
#   Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.

mod_full_brace_while    = Force
#   Add or remove braces on single-line 'while' statement

# --- M8 ---
sp_after_sparen         = Force
#   Add or remove space after ')' of 'if', 'for', 'switch', and 'while'

sp_else_brace           = Force
#   Add or remove space between 'else' and '{' if on the same line

sp_brace_else           = Force
#   Add or remove space between '}' and 'else' if on the same line

# --- M10 ---
sp_before_sparen        = Force # "if (i > max) {" vs "if(i > max) {"
#   Add or remove space before '(' of 'if', 'for', 'switch', and 'while'

# --- M11 ---
nl_enum_brace           = Remove	# "enum {" vs "enum \n {"
#   Add or remove newline between 'enum' and '{'

nl_struct_brace         = Remove	# "struct {" vs "struct \n {"
#   Add or remove newline between 'struct and '{'

nl_union_brace          = Remove	# "union {" vs "union \n {"
#   Add or remove newline between 'union' and '{'

nl_if_brace             = Remove	# "if () {" vs "if () \n {"
#   Add or remove newline between 'if' and '{'

nl_brace_else           = Remove    # "} else" vs "} \n else"
#   Add or remove newline between '}' and 'else'

nl_else_brace           = Remove	# "else {" vs "else \n {"
#   Add or remove newline between 'else' and '{'

nl_else_if              = Remove    # "else if" vs "else \n if"
#   Add or remove newline between 'else' and 'if'

nl_for_brace            = Remove	# "for () {" vs "for () \n {"
#   Add or remove newline between 'for' and '{'

nl_while_brace          = Remove    # "while {" vs "while \n {"
#   Add or remove newline between 'while' and '{'

nl_do_brace             = Remove	# "do {" vs "do \n {"
#   Add or remove newline between 'do' and '{'

nl_brace_while          = Remove	# "while () {" vs "while () \n {"
#   Add or remove newline between '}' and 'while' of 'do' statement

nl_switch_brace         = Remove	# "switch () {" vs "switch () \n {"
#   Add or remove newline between 'switch' and '{'

# --- M12 ---
indent_switch_case      = 0
#   Spaces to indent 'case' from 'switch'
#   Usually 0 or indent_columns.

# --- M13 ---
sp_member               = Remove
#   Add or remove space around the '.' or '->' operators. Default=Remove

# --- M14 ---
# XXX incomplete -- tackle line length later.

# code_width                                Number
#   Try to limit code width to N number of columns
code_width = 100

# cmt_width               = Number
#   Try to wrap comments at cmt_width columns
cmt_width = 72

# --- M15 ---
sp_before_square        = Remove
#   Add or remove space before '[' (except '[]')

sp_before_squares       = Remove
#   Add or remove space before '[]'

sp_inside_square        = Remove
#   Add or remove space inside a non-empty '[' and ']'

# --- M16 ---
sp_after_comma          = Force
#   Add or remove space after ','

sp_before_comma         = Remove
#   Add or remove space before ','

# --- M17 ---
sp_func_def_paren       = Remove
#   Add or remove space between function name and '(' on function definition

sp_func_call_paren      = Remove
#   Add or remove space between function name and '(' on function calls

sp_func_proto_paren     = Remove
#   Add or remove space between function name and '(' on function declaration

# --- M18 ---
sp_inside_paren         = Remove
#   Add or remove space inside '(' and ')'

sp_inside_fparens       = Remove
#   Add or remove space inside empty function '()'

sp_inside_sparen        = Remove
#   Add or remove space inside if-condition '(' and ')'

sp_paren_paren          = Remove
#   Add or remove space between nested parens: '((' vs ') )'

sp_inside_paren_cast    = Remove    # "(int)a" vs "( int )a"
#   Add or remove spaces inside cast parens

# --- M19 ---
sp_deref                = Remove
#   Add or remove space after the '*' (dereference) operator. Default=Remove
#   This does not affect the spacing after a '*' that is part of a type.

sp_incdec               = Remove
#   Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove

# If the following is set to Remove it will change "(int *)x" to "(int*)x"
sp_after_cast           = Ignore
#   Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'

# --- M20 ---
sp_arith                = Add
#   Add or remove space around arithmetic operator '+', '-', '/', '*', etc

sp_assign               = Add
#   Add or remove space around assignment operator '=', '+=', etc

sp_bool                 = Force
#   Add or remove space around boolean operators '&&' and '||'

sp_compare              = Force
#   Add or remove space around compare operator '<', '>', '==', etc

# --- M21 ---
sp_sizeof_paren         = Remove    # "sizeof (int)" vs "sizeof(int)"
#   Add or remove space between 'sizeof' and '('

# --- M25 ---
cmt_c_nl_start          = True
#   Whether to put an empty '/*' on the first line of the combined c-comment

# --- M26 ---
cmt_star_cont           = True
#   Whether to put a star on subsequent comment lines

cmt_sp_after_star_cont  = 1
#   The number of spaces to insert after the star on subsequent comment lines

# --- M27 ---
cmt_c_nl_end            = True
#   Whether to put a newline before the closing '*/' of the combined c-comment

# --- M29 ---
indent_label            = 1		# pos: absolute col, neg: relative column

# --- M31 ---
nl_func_type_name       = Force
#   Add or remove newline between return type and function name in a function definition

# --- M32 ---
# The following two will force "return expr" whereas "return(expr)" or "return (expr)" are prohibited.
sp_return_paren         = Remove  # "return (1);" vs "return(1);"
#   Add or remove space between 'return' and '('
mod_paren_on_return     = Remove # Not strictly necessary with the preceding
#   Add or remove uecessary paren on 'return' statement

# --- M33 ---
indent_func_def_param   = False
#   Same as indent_func_call_param, but for function defs
# indent_func_call_param                    { False, True }
#   True:  indent continued function call parameters one indent level
#   False: align parameters under the open paren

# --- M34 ---
sp_before_semi          = Remove
#   Add or remove space before ';'. Default=Remove

sp_after_semi           = Force
#   Add or remove space after ';', except when followed by a comment. Default=Add

# --- M35 ---
eat_blanks_after_open_brace     = True
#   Whether to remove blank lines after '{'

eat_blanks_before_close_brace   = True
#   Whether to remove blank lines before '}'

# --- M36 ---
align_var_def_star_style        = 1
#   How to align the star in variable definitions.
#    0=Part of the type     'void *   foo;'
#    1=Part of the variable 'void     *foo;'
#    2=Dangling             'void    *foo;'

# --- Defaults that we do not want ---
indent_align_assign             = False
#   Align continued statements at the '='. Default=True
#   If FALSE or the '=' is followed by a newline, the next line is indent one tab.

sp_pp_concat                    = Ignore
#   Add or remove space around preprocessor '##' concatenation operator. Default=Add

# sp_after_type is needed in order to maintain at least one space before opening brace for
# struct definitions when a newline was removed. It needs to be "Add" and not the default
# "Force" because anywhere there is a declaration where the type and name are aligned
# using multiple spaces the alignment would be lost. eg:
# from osfmk/kern/kdebug.c:
#-struct tts$
#-{$
#-  task_t    task;            /* from procs task */$
#-  pid_t     pid;             /* from procs p_pid  */$
#-  char      task_comm[20];   /* from procs p_comm */$
#+struct tts {$
#+^Itask_t    task;      /* from procs task */$
#+^Ipid_t     pid;       /* from procs p_pid  */$
#+^Ichar      task_comm[20];/* from procs p_comm */$
sp_after_type                   = Add
#   Add or remove space between type and word. Default=Force

align_asm_colon                 = False
#   Align text after asm volatile () colons.

indent_ignore_asm_block         = True
#   If true, ignore indent and align for asm blocks as they have their own indentation.

# pp_ignore_define_body: disables formatting inside #define bodies. Otherwise, end-braces
# added after single-line conditional statements are placed on the same line as the
# statement. It does not dedicate a '\'-continued line for the closing brace when
# the style otherwise requires it. e.g. bsd/sys/queue.h gets:
#                        while (SLIST_NEXT(curelm, field) != (elm)) {              \
#                                curelm = SLIST_NEXT(curelm, field);}             \
pp_ignore_define_body = True
#   Whether to ignore the '#define' body while formatting.

# Leftover, inactive options from the "K&R" config
# align_enum_equ_span		= 4
# align_nl_cont			= TRUE
# align_var_def_span		= 2
# align_var_def_inline		= TRUE
# align_var_def_star		= TRUE
# align_var_def_colon		= TRUE
# align_assign_span		= 1
# align_struct_init_span		= 3
# align_var_struct_span		= 3
# align_right_cmt_span		= 3
# align_pp_define_span		= 3
# align_pp_define_gap		= 4
# align_number_left		= TRUE
# align_typedef_span		= 5
# align_typedef_gap		= 3

# Full documentation below
#
# # Uncrustify-0.67_f
# #
# # General options
# #
# 
# newlines                        { Auto, LF, CR, CRLF }
#   The type of line endings. Default=Auto.
# 
# input_tab_size                  Unsigned Number
#   The original size of tabs in the input. Default=8.
# 
# output_tab_size                 Unsigned Number
#   The size of tabs in the output (only used if align_with_tabs=true). Default=8.
# 
# string_escape_char              Unsigned Number
#   The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn).
# 
# string_escape_char2             Unsigned Number
#   Alternate string escape char for Pawn. Only works right before the quote char.
# 
# string_replace_tab_chars        { False, True }
#   Replace tab characters found in string literals with the escape sequence \t instead.
# 
# tok_split_gte                   { False, True }
#   Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
#   If True, 'assert(x<0 && y>=3)' will be broken. Default=False
#   Improvements to template detection may make this option obsolete.
# 
# disable_processing_cmt          String
#   Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
# 
# enable_processing_cmt           String
#   Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
# 
# enable_digraphs                 { False, True }
#   Enable parsing of digraphs. Default=False.
# 
# utf8_bom                        { Ignore, Add, Remove, Force }
#   Control what to do with the UTF-8 BOM (recommend 'remove').
# 
# utf8_byte                       { False, True }
#   If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8.
# 
# utf8_force                      { False, True }
#   Force the output encoding to UTF-8.
# 
# #
# # Spacing options
# #
# 
# sp_arith                        { Ignore, Add, Remove, Force }
#   Add or remove space around arithmetic operator '+', '-', '/', '*', etc
#   also '>>>' '<<' '>>' '%' '|'.
# 
# sp_arith_additive               { Ignore, Add, Remove, Force }
#   Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith
# 
# sp_assign                       { Ignore, Add, Remove, Force }
#   Add or remove space around assignment operator '=', '+=', etc.
# 
# sp_cpp_lambda_assign            { Ignore, Add, Remove, Force }
#   Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign.
# 
# sp_cpp_lambda_paren             { Ignore, Add, Remove, Force }
#   Add or remove space after the capture specification in C++11 lambda.
# 
# sp_assign_default               { Ignore, Add, Remove, Force }
#   Add or remove space around assignment operator '=' in a prototype.
# 
# sp_before_assign                { Ignore, Add, Remove, Force }
#   Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
# 
# sp_after_assign                 { Ignore, Add, Remove, Force }
#   Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
# 
# sp_enum_paren                   { Ignore, Add, Remove, Force }
#   Add or remove space in 'NS_ENUM ('.
# 
# sp_enum_assign                  { Ignore, Add, Remove, Force }
#   Add or remove space around assignment '=' in enum.
# 
# sp_enum_before_assign           { Ignore, Add, Remove, Force }
#   Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
# 
# sp_enum_after_assign            { Ignore, Add, Remove, Force }
#   Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
# 
# sp_enum_colon                   { Ignore, Add, Remove, Force }
#   Add or remove space around assignment ':' in enum.
# 
# sp_pp_concat                    { Ignore, Add, Remove, Force }
#   Add or remove space around preprocessor '##' concatenation operator. Default=Add.
# 
# sp_pp_stringify                 { Ignore, Add, Remove, Force }
#   Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
# 
# sp_before_pp_stringify          { Ignore, Add, Remove, Force }
#   Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
# 
# sp_bool                         { Ignore, Add, Remove, Force }
#   Add or remove space around boolean operators '&&' and '||'.
# 
# sp_compare                      { Ignore, Add, Remove, Force }
#   Add or remove space around compare operator '<', '>', '==', etc.
# 
# sp_inside_paren                 { Ignore, Add, Remove, Force }
#   Add or remove space inside '(' and ')'.
# 
# sp_paren_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between nested parens: '((' vs ') )'.
# 
# sp_cparen_oparen                { Ignore, Add, Remove, Force }
#   Add or remove space between back-to-back parens: ')(' vs ') ('.
# 
# sp_balance_nested_parens        { False, True }
#   Whether to balance spaces inside nested parens.
# 
# sp_paren_brace                  { Ignore, Add, Remove, Force }
#   Add or remove space between ')' and '{'.
# 
# sp_before_ptr_star              { Ignore, Add, Remove, Force }
#   Add or remove space before pointer star '*'.
# 
# sp_before_unnamed_ptr_star      { Ignore, Add, Remove, Force }
#   Add or remove space before pointer star '*' that isn't followed by a variable name
#   If set to 'ignore', sp_before_ptr_star is used instead.
# 
# sp_between_ptr_star             { Ignore, Add, Remove, Force }
#   Add or remove space between pointer stars '*'.
# 
# sp_after_ptr_star               { Ignore, Add, Remove, Force }
#   Add or remove space after pointer star '*', if followed by a word.
# 
# sp_after_ptr_block_caret        { Ignore, Add, Remove, Force }
#   Add or remove space after pointer caret '^', if followed by a word.
# 
# sp_after_ptr_star_qualifier     { Ignore, Add, Remove, Force }
#   Add or remove space after pointer star '*', if followed by a qualifier.
# 
# sp_after_ptr_star_func          { Ignore, Add, Remove, Force }
#   Add or remove space after a pointer star '*', if followed by a func proto/def.
# 
# sp_ptr_star_paren               { Ignore, Add, Remove, Force }
#   Add or remove space after a pointer star '*', if followed by an open paren (function types).
# 
# sp_before_ptr_star_func         { Ignore, Add, Remove, Force }
#   Add or remove space before a pointer star '*', if followed by a func proto/def.
# 
# sp_before_byref                 { Ignore, Add, Remove, Force }
#   Add or remove space before a reference sign '&'.
# 
# sp_before_unnamed_byref         { Ignore, Add, Remove, Force }
#   Add or remove space before a reference sign '&' that isn't followed by a variable name.
#   If set to 'ignore', sp_before_byref is used instead.
# 
# sp_after_byref                  { Ignore, Add, Remove, Force }
#   Add or remove space after reference sign '&', if followed by a word.
# 
# sp_after_byref_func             { Ignore, Add, Remove, Force }
#   Add or remove space after a reference sign '&', if followed by a func proto/def.
# 
# sp_before_byref_func            { Ignore, Add, Remove, Force }
#   Add or remove space before a reference sign '&', if followed by a func proto/def.
# 
# sp_after_type                   { Ignore, Add, Remove, Force }
#   Add or remove space between type and word. Default=Force.
# 
# sp_before_template_paren        { Ignore, Add, Remove, Force }
#   Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
# 
# sp_template_angle               { Ignore, Add, Remove, Force }
#   Add or remove space in 'template <' vs 'template<'.
#   If set to ignore, sp_before_angle is used.
# 
# sp_before_angle                 { Ignore, Add, Remove, Force }
#   Add or remove space before '<>'.
# 
# sp_inside_angle                 { Ignore, Add, Remove, Force }
#   Add or remove space inside '<' and '>'.
# 
# sp_angle_colon                  { Ignore, Add, Remove, Force }
#   Add or remove space between '<>' and ':'.
# 
# sp_after_angle                  { Ignore, Add, Remove, Force }
#   Add or remove space after '<>'.
# 
# sp_angle_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between '<>' and '(' as found in 'new List<byte>(foo);'.
# 
# sp_angle_paren_empty            { Ignore, Add, Remove, Force }
#   Add or remove space between '<>' and '()' as found in 'new List<byte>();'.
# 
# sp_angle_word                   { Ignore, Add, Remove, Force }
#   Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...'.
# 
# sp_angle_shift                  { Ignore, Add, Remove, Force }
#   Add or remove space between '>' and '>' in '>>' (template stuff). Default=Add.
# 
# sp_permit_cpp11_shift           { False, True }
#   Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False.
#   sp_angle_shift cannot remove the space without this option.
# 
# sp_before_sparen                { Ignore, Add, Remove, Force }
#   Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.
# 
# sp_inside_sparen                { Ignore, Add, Remove, Force }
#   Add or remove space inside if-condition '(' and ')'.
# 
# sp_inside_sparen_close          { Ignore, Add, Remove, Force }
#   Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
# 
# sp_inside_sparen_open           { Ignore, Add, Remove, Force }
#   Add or remove space after if-condition '('. Overrides sp_inside_sparen.
# 
# sp_after_sparen                 { Ignore, Add, Remove, Force }
#   Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.
# 
# sp_sparen_brace                 { Ignore, Add, Remove, Force }
#   Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.
# 
# sp_invariant_paren              { Ignore, Add, Remove, Force }
#   Add or remove space between 'invariant' and '(' in the D language.
# 
# sp_after_invariant_paren        { Ignore, Add, Remove, Force }
#   Add or remove space after the ')' in 'invariant (C) c' in the D language.
# 
# sp_special_semi                 { Ignore, Add, Remove, Force }
#   Add or remove space before empty statement ';' on 'if', 'for' and 'while'.
# 
# sp_before_semi                  { Ignore, Add, Remove, Force }
#   Add or remove space before ';'. Default=Remove.
# 
# sp_before_semi_for              { Ignore, Add, Remove, Force }
#   Add or remove space before ';' in non-empty 'for' statements.
# 
# sp_before_semi_for_empty        { Ignore, Add, Remove, Force }
#   Add or remove space before a semicolon of an empty part of a for statement.
# 
# sp_after_semi                   { Ignore, Add, Remove, Force }
#   Add or remove space after ';', except when followed by a comment. Default=Add.
# 
# sp_after_semi_for               { Ignore, Add, Remove, Force }
#   Add or remove space after ';' in non-empty 'for' statements. Default=Force.
# 
# sp_after_semi_for_empty         { Ignore, Add, Remove, Force }
#   Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
# 
# sp_before_square                { Ignore, Add, Remove, Force }
#   Add or remove space before '[' (except '[]').
# 
# sp_before_squares               { Ignore, Add, Remove, Force }
#   Add or remove space before '[]'.
# 
# sp_cpp_before_struct_binding    { Ignore, Add, Remove, Force }
#   Add or remove space before structured bindings. Only for C++17.
# 
# sp_inside_square                { Ignore, Add, Remove, Force }
#   Add or remove space inside a non-empty '[' and ']'.
# 
# sp_inside_square_oc_array       { Ignore, Add, Remove, Force }
#   Add or remove space inside a non-empty OC boxed array '@[' and ']'.
#   If set to ignore, sp_inside_square is used.
# 
# sp_after_comma                  { Ignore, Add, Remove, Force }
#   Add or remove space after ',', 'a,b' vs 'a, b'.
# 
# sp_before_comma                 { Ignore, Add, Remove, Force }
#   Add or remove space before ','. Default=Remove.
# 
# sp_after_mdatype_commas         { Ignore, Add, Remove, Force }
#   Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#.
# 
# sp_before_mdatype_commas        { Ignore, Add, Remove, Force }
#   Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#.
# 
# sp_between_mdatype_commas       { Ignore, Add, Remove, Force }
#   Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#.
# 
# sp_paren_comma                  { Ignore, Add, Remove, Force }
#   Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force.
# 
# sp_before_ellipsis              { Ignore, Add, Remove, Force }
#   Add or remove space before the variadic '...' when preceded by a non-punctuator.
# 
# sp_after_class_colon            { Ignore, Add, Remove, Force }
#   Add or remove space after class ':'.
# 
# sp_before_class_colon           { Ignore, Add, Remove, Force }
#   Add or remove space before class ':'.
# 
# sp_after_constr_colon           { Ignore, Add, Remove, Force }
#   Add or remove space after class constructor ':'.
# 
# sp_before_constr_colon          { Ignore, Add, Remove, Force }
#   Add or remove space before class constructor ':'.
# 
# sp_before_case_colon            { Ignore, Add, Remove, Force }
#   Add or remove space before case ':'. Default=Remove.
# 
# sp_after_operator               { Ignore, Add, Remove, Force }
#   Add or remove space between 'operator' and operator sign.
# 
# sp_after_operator_sym           { Ignore, Add, Remove, Force }
#   Add or remove space between the operator symbol and the open paren, as in 'operator ++('.
# 
# sp_after_operator_sym_empty     { Ignore, Add, Remove, Force }
#   Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'.
# 
# sp_after_cast                   { Ignore, Add, Remove, Force }
#   Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'.
# 
# sp_inside_paren_cast            { Ignore, Add, Remove, Force }
#   Add or remove spaces inside cast parens.
# 
# sp_cpp_cast_paren               { Ignore, Add, Remove, Force }
#   Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'.
# 
# sp_sizeof_paren                 { Ignore, Add, Remove, Force }
#   Add or remove space between 'sizeof' and '('.
# 
# sp_after_tag                    { Ignore, Add, Remove, Force }
#   Add or remove space after the tag keyword (Pawn).
# 
# sp_inside_braces_enum           { Ignore, Add, Remove, Force }
#   Add or remove space inside enum '{' and '}'.
# 
# sp_inside_braces_struct         { Ignore, Add, Remove, Force }
#   Add or remove space inside struct/union '{' and '}'.
# 
# sp_inside_braces_oc_dict        { Ignore, Add, Remove, Force }
#   Add or remove space inside OC boxed dictionary @'{' and '}'
# 
# sp_after_type_brace_init_lst_open { Ignore, Add, Remove, Force }
#   Add or remove space after open brace in an unnamed temporary direct-list-initialization.
# 
# sp_before_type_brace_init_lst_close { Ignore, Add, Remove, Force }
#   Add or remove space before close brace in an unnamed temporary direct-list-initialization.
# 
# sp_inside_type_brace_init_lst   { Ignore, Add, Remove, Force }
#   Add or remove space inside an unnamed temporary direct-list-initialization.
# 
# sp_inside_braces                { Ignore, Add, Remove, Force }
#   Add or remove space inside '{' and '}'.
# 
# sp_inside_braces_empty          { Ignore, Add, Remove, Force }
#   Add or remove space inside '{}'.
# 
# sp_type_func                    { Ignore, Add, Remove, Force }
#   Add or remove space between return type and function name
#   A minimum of 1 is forced except for pointer return types.
# 
# sp_type_brace_init_lst          { Ignore, Add, Remove, Force }
#   Add or remove space between type and open brace of an unnamed temporary direct-list-initialization.
# 
# sp_func_proto_paren             { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '(' on function declaration.
# 
# sp_func_proto_paren_empty       { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '()' on function declaration without parameters.
# 
# sp_func_def_paren               { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '(' on function definition.
# 
# sp_func_def_paren_empty         { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '()' on function definition without parameters.
# 
# sp_inside_fparens               { Ignore, Add, Remove, Force }
#   Add or remove space inside empty function '()'.
# 
# sp_inside_fparen                { Ignore, Add, Remove, Force }
#   Add or remove space inside function '(' and ')'.
# 
# sp_inside_tparen                { Ignore, Add, Remove, Force }
#   Add or remove space inside the first parens in the function type: 'void (*x)(...)'.
# 
# sp_after_tparen_close           { Ignore, Add, Remove, Force }
#   Add or remove between the parens in the function type: 'void (*x)(...)'.
# 
# sp_square_fparen                { Ignore, Add, Remove, Force }
#   Add or remove space between ']' and '(' when part of a function call.
# 
# sp_fparen_brace                 { Ignore, Add, Remove, Force }
#   Add or remove space between ')' and '{' of function.
# 
# sp_fparen_brace_initializer     { Ignore, Add, Remove, Force }
#   Add or remove space between ')' and '{' of function call in object initialization. Overrides sp_fparen_brace.
# 
# sp_fparen_dbrace                { Ignore, Add, Remove, Force }
#   Java: Add or remove space between ')' and '{{' of double brace initializer.
# 
# sp_func_call_paren              { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '(' on function calls.
# 
# sp_func_call_paren_empty        { Ignore, Add, Remove, Force }
#   Add or remove space between function name and '()' on function calls without parameters.
#   If set to 'ignore' (the default), sp_func_call_paren is used.
# 
# sp_func_call_user_paren         { Ignore, Add, Remove, Force }
#   Add or remove space between the user function name and '(' on function calls
#   You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
# 
# sp_func_call_user_inside_fparen { Ignore, Add, Remove, Force }
#   Add or remove space inside user function '(' and ')'
#   You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
# 
# sp_func_call_user_paren_paren   { Ignore, Add, Remove, Force }
#   Add or remove space between nested parens with user functions: '((' vs ') )'You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
# 
# sp_func_class_paren             { Ignore, Add, Remove, Force }
#   Add or remove space between a constructor/destructor and the open paren.
# 
# sp_func_class_paren_empty       { Ignore, Add, Remove, Force }
#   Add or remove space between a constructor without parameters or destructor and '()'.
# 
# sp_return_paren                 { Ignore, Add, Remove, Force }
#   Add or remove space between 'return' and '('.
# 
# sp_attribute_paren              { Ignore, Add, Remove, Force }
#   Add or remove space between '__attribute__' and '('.
# 
# sp_defined_paren                { Ignore, Add, Remove, Force }
#   Add or remove space between 'defined' and '(' in '#if defined (FOO)'.
# 
# sp_throw_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'throw' and '(' in 'throw (something)'.
# 
# sp_after_throw                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'.
# 
# sp_catch_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'catch' and '(' in 'catch (something) { }'
#   If set to ignore, sp_before_sparen is used.
# 
# sp_oc_catch_paren               { Ignore, Add, Remove, Force }
#   Add or remove space between '@catch' and '(' in '@catch (something) { }'
#   If set to ignore, sp_catch_paren is used.
# 
# sp_version_paren                { Ignore, Add, Remove, Force }
#   Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
#   If set to ignore, sp_before_sparen is used.
# 
# sp_scope_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
#   If set to ignore, sp_before_sparen is used.
# 
# sp_super_paren                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove.
# 
# sp_this_paren                   { Ignore, Add, Remove, Force }
#   Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove.
# 
# sp_macro                        { Ignore, Add, Remove, Force }
#   Add or remove space between macro and value.
# 
# sp_macro_func                   { Ignore, Add, Remove, Force }
#   Add or remove space between macro function ')' and value.
# 
# sp_else_brace                   { Ignore, Add, Remove, Force }
#   Add or remove space between 'else' and '{' if on the same line.
# 
# sp_brace_else                   { Ignore, Add, Remove, Force }
#   Add or remove space between '}' and 'else' if on the same line.
# 
# sp_brace_typedef                { Ignore, Add, Remove, Force }
#   Add or remove space between '}' and the name of a typedef on the same line.
# 
# sp_catch_brace                  { Ignore, Add, Remove, Force }
#   Add or remove space between 'catch' and '{' if on the same line.
# 
# sp_oc_catch_brace               { Ignore, Add, Remove, Force }
#   Add or remove space between '@catch' and '{' if on the same line.
#   If set to ignore, sp_catch_brace is used.
# 
# sp_brace_catch                  { Ignore, Add, Remove, Force }
#   Add or remove space between '}' and 'catch' if on the same line.
# 
# sp_oc_brace_catch               { Ignore, Add, Remove, Force }
#   Add or remove space between '}' and '@catch' if on the same line.
#   If set to ignore, sp_brace_catch is used.
# 
# sp_finally_brace                { Ignore, Add, Remove, Force }
#   Add or remove space between 'finally' and '{' if on the same line.
# 
# sp_brace_finally                { Ignore, Add, Remove, Force }
#   Add or remove space between '}' and 'finally' if on the same line.
# 
# sp_try_brace                    { Ignore, Add, Remove, Force }
#   Add or remove space between 'try' and '{' if on the same line.
# 
# sp_getset_brace                 { Ignore, Add, Remove, Force }
#   Add or remove space between get/set and '{' if on the same line.
# 
# sp_word_brace                   { Ignore, Add, Remove, Force }
#   Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add.
# 
# sp_word_brace_ns                { Ignore, Add, Remove, Force }
#   Add or remove space between a variable and '{' for a namespace. Default=Add.
# 
# sp_before_dc                    { Ignore, Add, Remove, Force }
#   Add or remove space before the '::' operator.
# 
# sp_after_dc                     { Ignore, Add, Remove, Force }
#   Add or remove space after the '::' operator.
# 
# sp_d_array_colon                { Ignore, Add, Remove, Force }
#   Add or remove around the D named array initializer ':' operator.
# 
# sp_not                          { Ignore, Add, Remove, Force }
#   Add or remove space after the '!' (not) operator. Default=Remove.
# 
# sp_inv                          { Ignore, Add, Remove, Force }
#   Add or remove space after the '~' (invert) operator. Default=Remove.
# 
# sp_addr                         { Ignore, Add, Remove, Force }
#   Add or remove space after the '&' (address-of) operator. Default=Remove
#   This does not affect the spacing after a '&' that is part of a type.
# 
# sp_member                       { Ignore, Add, Remove, Force }
#   Add or remove space around the '.' or '->' operators. Default=Remove.
# 
# sp_deref                        { Ignore, Add, Remove, Force }
#   Add or remove space after the '*' (dereference) operator. Default=Remove
#   This does not affect the spacing after a '*' that is part of a type.
# 
# sp_sign                         { Ignore, Add, Remove, Force }
#   Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove.
# 
# sp_incdec                       { Ignore, Add, Remove, Force }
#   Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove.
# 
# sp_before_nl_cont               { Ignore, Add, Remove, Force }
#   Add or remove space before a backslash-newline at the end of a line. Default=Add.
# 
# sp_after_oc_scope               { Ignore, Add, Remove, Force }
#   Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'.
# 
# sp_after_oc_colon               { Ignore, Add, Remove, Force }
#   Add or remove space after the colon in message specs
#   '-(int) f:(int) x;' vs '-(int) f: (int) x;'.
# 
# sp_before_oc_colon              { Ignore, Add, Remove, Force }
#   Add or remove space before the colon in message specs
#   '-(int) f: (int) x;' vs '-(int) f : (int) x;'.
# 
# sp_after_oc_dict_colon          { Ignore, Add, Remove, Force }
#   Add or remove space after the colon in immutable dictionary expression
#   'NSDictionary *test = @{@"foo" :@"bar"};'.
# 
# sp_before_oc_dict_colon         { Ignore, Add, Remove, Force }
#   Add or remove space before the colon in immutable dictionary expression
#   'NSDictionary *test = @{@"foo" :@"bar"};'.
# 
# sp_after_send_oc_colon          { Ignore, Add, Remove, Force }
#   Add or remove space after the colon in message specs
#   '[object setValue:1];' vs '[object setValue: 1];'.
# 
# sp_before_send_oc_colon         { Ignore, Add, Remove, Force }
#   Add or remove space before the colon in message specs
#   '[object setValue:1];' vs '[object setValue :1];'.
# 
# sp_after_oc_type                { Ignore, Add, Remove, Force }
#   Add or remove space after the (type) in message specs
#   '-(int)f: (int) x;' vs '-(int)f: (int)x;'.
# 
# sp_after_oc_return_type         { Ignore, Add, Remove, Force }
#   Add or remove space after the first (type) in message specs
#   '-(int) f:(int)x;' vs '-(int)f:(int)x;'.
# 
# sp_after_oc_at_sel              { Ignore, Add, Remove, Force }
#   Add or remove space between '@selector' and '('
#   '@selector(msgName)' vs '@selector (msgName)'
#   Also applies to @protocol() constructs.
# 
# sp_after_oc_at_sel_parens       { Ignore, Add, Remove, Force }
#   Add or remove space between '@selector(x)' and the following word
#   '@selector(foo) a:' vs '@selector(foo)a:'.
# 
# sp_inside_oc_at_sel_parens      { Ignore, Add, Remove, Force }
#   Add or remove space inside '@selector' parens
#   '@selector(foo)' vs '@selector( foo )'
#   Also applies to @protocol() constructs.
# 
# sp_before_oc_block_caret        { Ignore, Add, Remove, Force }
#   Add or remove space before a block pointer caret
#   '^int (int arg){...}' vs. ' ^int (int arg){...}'.
# 
# sp_after_oc_block_caret         { Ignore, Add, Remove, Force }
#   Add or remove space after a block pointer caret
#   '^int (int arg){...}' vs. '^ int (int arg){...}'.
# 
# sp_after_oc_msg_receiver        { Ignore, Add, Remove, Force }
#   Add or remove space between the receiver and selector in a message.
#   '[receiver selector ...]'.
# 
# sp_after_oc_property            { Ignore, Add, Remove, Force }
#   Add or remove space after @property.
# 
# sp_after_oc_synchronized        { Ignore, Add, Remove, Force }
#   Add or remove space between '@synchronized' and the parenthesis
#   '@synchronized(foo)' vs '@synchronized (foo)'.
# 
# sp_cond_colon                   { Ignore, Add, Remove, Force }
#   Add or remove space around the ':' in 'b ? t : f'.
# 
# sp_cond_colon_before            { Ignore, Add, Remove, Force }
#   Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.
# 
# sp_cond_colon_after             { Ignore, Add, Remove, Force }
#   Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.
# 
# sp_cond_question                { Ignore, Add, Remove, Force }
#   Add or remove space around the '?' in 'b ? t : f'.
# 
# sp_cond_question_before         { Ignore, Add, Remove, Force }
#   Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.
# 
# sp_cond_question_after          { Ignore, Add, Remove, Force }
#   Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.
# 
# sp_cond_ternary_short           { Ignore, Add, Remove, Force }
#   In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.
# 
# sp_case_label                   { Ignore, Add, Remove, Force }
#   Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
# 
# sp_range                        { Ignore, Add, Remove, Force }
#   Control the space around the D '..' operator.
# 
# sp_after_for_colon              { Ignore, Add, Remove, Force }
#   Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
# 
# sp_before_for_colon             { Ignore, Add, Remove, Force }
#   Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
# 
# sp_extern_paren                 { Ignore, Add, Remove, Force }
#   Control the spacing in 'extern (C)' (D).
# 
# sp_cmt_cpp_start                { Ignore, Add, Remove, Force }
#   Control the space after the opening of a C++ comment '// A' vs '//A'.
# 
# sp_cmt_cpp_doxygen              { False, True }
#   True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.
# 
# sp_cmt_cpp_qttr                 { False, True }
#   True: If space is added with sp_cmt_cpp_start, do it after Qt traator or meta-data comments like '//:', '//=', and '//~'.
# 
# sp_endif_cmt                    { Ignore, Add, Remove, Force }
#   Controls the spaces between #else or #endif and a trailing comment.
# 
# sp_after_new                    { Ignore, Add, Remove, Force }
#   Controls the spaces after 'new', 'delete' and 'delete[]'.
# 
# sp_between_new_paren            { Ignore, Add, Remove, Force }
#   Controls the spaces between new and '(' in 'new()'.
# 
# sp_after_newop_paren            { Ignore, Add, Remove, Force }
#   Controls the spaces between ')' and 'type' in 'new(foo) BAR'.
# 
# sp_inside_newop_paren           { Ignore, Add, Remove, Force }
#   Controls the spaces inside paren of the new operator: 'new(foo) BAR'.
# 
# sp_inside_newop_paren_open      { Ignore, Add, Remove, Force }
#   Controls the space after open paren of the new operator: 'new(foo) BAR'.
#   Overrides sp_inside_newop_paren.
# 
# sp_inside_newop_paren_close     { Ignore, Add, Remove, Force }
#   Controls the space before close paren of the new operator: 'new(foo) BAR'.
#   Overrides sp_inside_newop_paren.
# 
# sp_before_tr_emb_cmt            { Ignore, Add, Remove, Force }
#   Controls the spaces before a trailing or embedded comment.
# 
# sp_num_before_tr_emb_cmt        Unsigned Number
#   Number of spaces before a trailing or embedded comment.
# 
# sp_annotation_paren             { Ignore, Add, Remove, Force }
#   Control space between a Java annotation and the open paren.
# 
# sp_skip_vbrace_tokens           { False, True }
#   If True, vbrace tokens are dropped to the previous token and skipped.
# 
# sp_after_noexcept               { Ignore, Add, Remove, Force }
#   Controls the space after 'noexcept'.
# 
# force_tab_after_define          { False, True }
#   If True, a <TAB> is inserted after #define.
# 
# #
# # Indenting
# #
# 
# indent_columns                  Unsigned Number
#   The number of columns to indent per level.
#   Usually 2, 3, 4, or 8. Default=8.
# 
# indent_continue                 Number
#   The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
#   For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.
#   negative value are OK.
# 
# indent_continue_class_head      Unsigned Number
#   The continuation indent, only for class header line(s).
#   If non-zero, this overrides the indent of 'class' continuation indents.
#   
# 
# indent_single_newlines          { False, True }
#   Indent empty lines - lines which contain only spaces before newline character
# 
# indent_param                    Unsigned Number
#   The continuation indent for func_*_param if they are true.
#   If non-zero, this overrides the indent.
# 
# indent_with_tabs                Unsigned Number
#   How to use tabs when indenting code
#   0=spaces only
#   1=indent with tabs to brace level, align with spaces (default)
#   2=indent and align with tabs, using spaces when not on a tabstop
# 
# indent_cmt_with_tabs            { False, True }
#   Comments that are not a brace level are indented with tabs on a tabstop.
#   Requires indent_with_tabs=2. If false, will use spaces.
# 
# indent_align_string             { False, True }
#   Whether to indent strings broken by '\' so that they line up.
# 
# indent_xml_string               Unsigned Number
#   The number of spaces to indent multi-line XML strings.
#   Requires indent_align_string=True.
# 
# indent_brace                    Unsigned Number
#   Spaces to indent '{' from level.
# 
# indent_braces                   { False, True }
#   Whether braces are indented to the body level.
# 
# indent_braces_no_func           { False, True }
#   Disabled indenting function braces if indent_braces is True.
# 
# indent_braces_no_class          { False, True }
#   Disabled indenting class braces if indent_braces is True.
# 
# indent_braces_no_struct         { False, True }
#   Disabled indenting struct braces if indent_braces is True.
# 
# indent_brace_parent             { False, True }
#   Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
# 
# indent_paren_open_brace         { False, True }
#   Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
# 
# indent_cs_delegate_brace        { False, True }
#   indent a C# delegate by another level, default is to not indent by another level.
# 
# indent_cs_delegate_body         { False, True }
#   indent a C# delegate(To hanndle delegates with no brace) by another level. default: false
# 
# indent_namespace                { False, True }
#   Whether the 'namespace' body is indented.
# 
# indent_namespace_single_indent  { False, True }
#   Only indent one namespace and no sub-namespaces.
#   Requires indent_namespace=True.
# 
# indent_namespace_level          Unsigned Number
#   The number of spaces to indent a namespace block.
# 
# indent_namespace_limit          Unsigned Number
#   If the body of the namespace is longer than this number, it won't be indented.
#   Requires indent_namespace=True. Default=0 (no limit)
# 
# indent_extern                   { False, True }
#   Whether the 'extern "C"' body is indented.
# 
# indent_class                    { False, True }
#   Whether the 'class' body is indented.
# 
# indent_class_colon              { False, True }
#   Whether to indent the stuff after a leading base class colon.
# 
# indent_class_on_colon           { False, True }
#   Indent based on a class colon instead of the stuff after the colon.
#   Requires indent_class_colon=True. Default=False.
# 
# indent_constr_colon             { False, True }
#   Whether to indent the stuff after a leading class initializer colon.
# 
# indent_ctor_init_leading        Unsigned Number
#   Virtual indent from the ':' for member initializers. Default=2.
# 
# indent_ctor_init                Number
#   Additional indent for constructor initializer list.
#   Negative values decrease indent down to the first column. Default=0.
# 
# indent_else_if                  { False, True }
#   False=treat 'else\nif' as 'else if' for indenting purposes
#   True=indent the 'if' one level.
# 
# indent_var_def_blk              Number
#   Amount to indent variable declarations after a open brace. neg=relative, pos=absolute.
#   negative value are OK.
# 
# indent_var_def_cont             { False, True }
#   Indent continued variable declarations instead of aligning.
# 
# indent_shift                    { False, True }
#   Indent continued shift expressions ('<<' and '>>') instead of aligning.
#   Turn align_left_shift off when enabling this.
# 
# indent_func_def_force_col1      { False, True }
#   True:  force indentation of function definition to start in column 1
#   False: use the default behavior.
# 
# indent_func_call_param          { False, True }
#   True:  indent continued function call parameters one indent level
#   False: align parameters under the open paren.
# 
# indent_func_def_param           { False, True }
#   Same as indent_func_call_param, but for function defs.
# 
# indent_func_proto_param         { False, True }
#   Same as indent_func_call_param, but for function protos.
# 
# indent_func_class_param         { False, True }
#   Same as indent_func_call_param, but for class declarations.
# 
# indent_func_ctor_var_param      { False, True }
#   Same as indent_func_call_param, but for class variable constructors.
# 
# indent_template_param           { False, True }
#   Same as indent_func_call_param, but for templates.
# 
# indent_func_param_double        { False, True }
#   Double the indent for indent_func_xxx_param options.
#   Use both values of the options indent_columns and indent_param.
# 
# indent_func_const               Unsigned Number
#   Indentation column for standalone 'const' function decl/proto qualifier.
# 
# indent_func_throw               Unsigned Number
#   Indentation column for standalone 'throw' function decl/proto qualifier.
# 
# indent_member                   Unsigned Number
#   The number of spaces to indent a continued '->' or '.'
#   Usually set to 0, 1, or indent_columns.
# 
# indent_member_single            { False, True }
#   setting to true will indent lines broken at '.' or '->' by a single indent
#   UO_indent_member option will not be effective if this is set to true.
# 
# indent_sing_line_comments       Unsigned Number
#   Spaces to indent single line ('//') comments on lines before code.
# 
# indent_relative_single_line_comments { False, True }
#   If set, will indent trailing single line ('//') comments relative
#   to the code instead of trying to keep the same absolute column.
# 
# indent_switch_case              Unsigned Number
#   Spaces to indent 'case' from 'switch'
#   Usually 0 or indent_columns.
# 
# indent_switch_pp                { False, True }
#   Whether to indent preprocessor statements inside of switch statements.
# 
# indent_case_shift               Unsigned Number
#   Spaces to shift the 'case' line, without affecting any other lines
#   Usually 0.
# 
# indent_case_brace               Number
#   Spaces to indent '{' from 'case'.
#   By default, the brace will appear under the 'c' in case.
#   Usually set to 0 or indent_columns.
#   negative value are OK.
# 
# indent_col1_comment             { False, True }
#   Whether to indent comments found in first column.
# 
# indent_label                    Number
#   How to indent goto labels
#     >0: absolute column where 1 is the leftmost column
#    <=0: subtract from brace indent
#   Default=1
# 
# indent_access_spec              Number
#   Same as indent_label, but for access specifiers that are followed by a colon. Default=1
# 
# indent_access_spec_body         { False, True }
#   Indent the code after an access specifier by one level.
#   If set, this option forces 'indent_access_spec=0'.
# 
# indent_paren_nl                 { False, True }
#   If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended).
# 
# indent_paren_close              Unsigned Number
#   Controls the indent of a close paren after a newline.
#   0: Indent to body level
#   1: Align under the open paren
#   2: Indent to the brace level
# 
# indent_paren_after_func_def     { False, True }
#   Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren
# 
# indent_paren_after_func_decl    { False, True }
#   Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren
# 
# indent_paren_after_func_call    { False, True }
#   Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren
# 
# indent_comma_paren              { False, True }
#   Controls the indent of a comma when inside a paren.If True, aligns under the open paren.
# 
# indent_bool_paren               { False, True }
#   Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren.
# 
# indent_semicolon_for_paren      { False, True }
#   Controls the indent of a semicolon when inside a for paren.If True, aligns under the open for paren.
# 
# indent_first_bool_expr          { False, True }
#   If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
# 
# indent_first_for_expr           { False, True }
#   If 'indent_semicolon_for_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
# 
# indent_square_nl                { False, True }
#   If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended).
# 
# indent_preserve_sql             { False, True }
#   Don't change the relative indent of ESQL/C 'EXEC SQL' bodies.
# 
# indent_align_assign             { False, True }
#   Align continued statements at the '='. Default=True
#   If False or the '=' is followed by a newline, the next line is indent one tab.
# 
# indent_align_paren              { False, True }
#   Align continued statements at the '('. Default=True
#   If FALSE or the '(' is not followed by a newline, the next line indent is one tab.
# 
# indent_oc_block                 { False, True }
#   Indent OC blocks at brace level instead of usual rules.
# 
# indent_oc_block_msg             Unsigned Number
#   Indent OC blocks in a message relative to the parameter name.
#   0=use indent_oc_block rules, 1+=spaces to indent
# 
# indent_oc_msg_colon             Unsigned Number
#   Minimum indent for subsequent parameters
# 
# indent_oc_msg_prioritize_first_colon { False, True }
#   If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
#   Default=True.
# 
# indent_oc_block_msg_xcode_style { False, True }
#   If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
# 
# indent_oc_block_msg_from_keyword { False, True }
#   If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
# 
# indent_oc_block_msg_from_colon  { False, True }
#   If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
# 
# indent_oc_block_msg_from_caret  { False, True }
#   If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
# 
# indent_oc_block_msg_from_brace  { False, True }
#   If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
# 
# indent_min_vbrace_open          Unsigned Number
#   When indenting after virtual brace open and newline add further spaces to reach this min. indent.
# 
# indent_vbrace_open_on_tabstop   { False, True }
#   True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.
# 
# indent_token_after_brace        { False, True }
#   If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True.
# 
# indent_cpp_lambda_body          { False, True }
#   If True, cpp lambda body will be indentedDefault=False.
# 
# indent_using_block              { False, True }
#   indent (or not) an using block if no braces are used. Only for C#.Default=True.
# 
# indent_ternary_operator         Unsigned Number
#   indent the continuation of ternary operator.
#   0: (Default) off
#   1: When the `if_false` is a continuation, indent it under `if_false`
#   2: When the `:` is a continuation, indent it under `?`
# 
# indent_off_after_return_new     { False, True }
#   If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column.
# 
# indent_single_after_return      { False, True }
#   If true, the tokens after return are indented with regular single indentation.By default (false) the indentation is after the return token.
# 
# indent_ignore_asm_block         { False, True }
#   If true, ignore indent and align for asm blocks as they have their own indentation.
# 
# #
# # Newline adding and removing options
# #
# 
# nl_collapse_empty_body          { False, True }
#   Whether to collapse empty blocks between '{' and '}'.
# 
# nl_assign_leave_one_liners      { False, True }
#   Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'.
# 
# nl_class_leave_one_liners       { False, True }
#   Don't split one-line braced statements inside a class xx { } body.
# 
# nl_enum_leave_one_liners        { False, True }
#   Don't split one-line enums: 'enum foo { BAR = 15 };'
# 
# nl_getset_leave_one_liners      { False, True }
#   Don't split one-line get or set functions.
# 
# nl_cs_property_leave_one_liners { False, True }
#   Don't split one-line get or set functions.
# 
# nl_func_leave_one_liners        { False, True }
#   Don't split one-line function definitions - 'int foo() { return 0; }'.
# 
# nl_cpp_lambda_leave_one_liners  { False, True }
#   Don't split one-line C++11 lambdas - '[]() { return 0; }'.
# 
# nl_if_leave_one_liners          { False, True }
#   Don't split one-line if/else statements - 'if(a) b++;'.
# 
# nl_while_leave_one_liners       { False, True }
#   Don't split one-line while statements - 'while(a) b++;'.
# 
# nl_oc_msg_leave_one_liner       { False, True }
#   Don't split one-line OC messages.
# 
# nl_oc_block_brace               { Ignore, Add, Remove, Force }
#   Add or remove newline between Objective-C block signature and '{'.
# 
# nl_oc_interface_brace           { Ignore, Add, Remove, Force }
#   Add or remove newline between @interface and '{'.
# 
# nl_oc_implementation_brace      { Ignore, Add, Remove, Force }
#   Add or remove newline between @implementation and '{'.
# 
# nl_start_of_file                { Ignore, Add, Remove, Force }
#   Add or remove newlines at the start of the file.
# 
# nl_start_of_file_min            Unsigned Number
#   The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'.
# 
# nl_end_of_file                  { Ignore, Add, Remove, Force }
#   Add or remove newline at the end of the file.
# 
# nl_end_of_file_min              Unsigned Number
#   The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force').
# 
# nl_assign_brace                 { Ignore, Add, Remove, Force }
#   Add or remove newline between '=' and '{'.
# 
# nl_assign_square                { Ignore, Add, Remove, Force }
#   Add or remove newline between '=' and '[' (D only).
# 
# nl_tsquare_brace                { Ignore, Add, Remove, Force }
#   Add or remove newline between '[]' and '{'.
# 
# nl_after_square_assign          { Ignore, Add, Remove, Force }
#   Add or remove newline after '= [' (D only). Will also affect the newline before the ']'.
# 
# nl_func_var_def_blk             Unsigned Number
#   The number of blank lines after a block of variable definitions at the top of a function body
#   0 = No change (default).
# 
# nl_typedef_blk_start            Unsigned Number
#   The number of newlines before a block of typedefs
#   0 = No change (default)
#   is overridden by the option 'nl_after_access_spec'.
# 
# nl_typedef_blk_end              Unsigned Number
#   The number of newlines after a block of typedefs
#   0 = No change (default).
# 
# nl_typedef_blk_in               Unsigned Number
#   The maximum consecutive newlines within a block of typedefs
#   0 = No change (default).
# 
# nl_var_def_blk_start            Unsigned Number
#   The number of newlines before a block of variable definitions not at the top of a function body
#   0 = No change (default)
#   is overridden by the option 'nl_after_access_spec'.
# 
# nl_var_def_blk_end              Unsigned Number
#   The number of newlines after a block of variable definitions not at the top of a function body
#   0 = No change (default).
# 
# nl_var_def_blk_in               Unsigned Number
#   The maximum consecutive newlines within a block of variable definitions
#   0 = No change (default).
# 
# nl_fcall_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between a function call's ')' and '{', as in:
#   list_for_each(item, &list) { }.
# 
# nl_enum_brace                   { Ignore, Add, Remove, Force }
#   Add or remove newline between 'enum' and '{'.
# 
# nl_enum_class                   { Ignore, Add, Remove, Force }
#   Add or remove newline between 'enum' and 'class'.
# 
# nl_enum_class_identifier        { Ignore, Add, Remove, Force }
#   Add or remove newline between 'enum class' and the identifier.
# 
# nl_enum_identifier_colon        { Ignore, Add, Remove, Force }
#   Add or remove newline between 'enum class' type and ':'.
# 
# nl_enum_colon_type              { Ignore, Add, Remove, Force }
#   Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'.
# 
# nl_struct_brace                 { Ignore, Add, Remove, Force }
#   Add or remove newline between 'struct and '{'.
# 
# nl_union_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'union' and '{'.
# 
# nl_if_brace                     { Ignore, Add, Remove, Force }
#   Add or remove newline between 'if' and '{'.
# 
# nl_brace_else                   { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and 'else'.
# 
# nl_elseif_brace                 { Ignore, Add, Remove, Force }
#   Add or remove newline between 'else if' and '{'
#   If set to ignore, nl_if_brace is used instead.
# 
# nl_else_brace                   { Ignore, Add, Remove, Force }
#   Add or remove newline between 'else' and '{'.
# 
# nl_else_if                      { Ignore, Add, Remove, Force }
#   Add or remove newline between 'else' and 'if'.
# 
# nl_before_if_closing_paren      { Ignore, Add, Remove, Force }
#   Add or remove newline before 'if'/'else if' closing parenthesis.
# 
# nl_brace_finally                { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and 'finally'.
# 
# nl_finally_brace                { Ignore, Add, Remove, Force }
#   Add or remove newline between 'finally' and '{'.
# 
# nl_try_brace                    { Ignore, Add, Remove, Force }
#   Add or remove newline between 'try' and '{'.
# 
# nl_getset_brace                 { Ignore, Add, Remove, Force }
#   Add or remove newline between get/set and '{'.
# 
# nl_for_brace                    { Ignore, Add, Remove, Force }
#   Add or remove newline between 'for' and '{'.
# 
# nl_catch_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'catch' and '{'.
# 
# nl_oc_catch_brace               { Ignore, Add, Remove, Force }
#   Add or remove newline between '@catch' and '{'.
#   If set to ignore, nl_catch_brace is used.
# 
# nl_brace_catch                  { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and 'catch'.
# 
# nl_oc_brace_catch               { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and 'catch'.
#   If set to ignore, nl_brace_catch is used.
# 
# nl_brace_square                 { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and ']'.
# 
# nl_brace_fparen                 { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and ')' in a function invocation.
# 
# nl_while_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'while' and '{'.
# 
# nl_scope_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'scope (x)' and '{' (D).
# 
# nl_unittest_brace               { Ignore, Add, Remove, Force }
#   Add or remove newline between 'unittest' and '{' (D).
# 
# nl_version_brace                { Ignore, Add, Remove, Force }
#   Add or remove newline between 'version (x)' and '{' (D).
# 
# nl_using_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'using' and '{'.
# 
# nl_brace_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between two open or close braces.
#   Due to general newline/brace handling, REMOVE may not work.
# 
# nl_do_brace                     { Ignore, Add, Remove, Force }
#   Add or remove newline between 'do' and '{'.
# 
# nl_brace_while                  { Ignore, Add, Remove, Force }
#   Add or remove newline between '}' and 'while' of 'do' statement.
# 
# nl_switch_brace                 { Ignore, Add, Remove, Force }
#   Add or remove newline between 'switch' and '{'.
# 
# nl_synchronized_brace           { Ignore, Add, Remove, Force }
#   Add or remove newline between 'synchronized' and '{'.
# 
# nl_multi_line_cond              { False, True }
#   Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
#   Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace.
# 
# nl_multi_line_define            { False, True }
#   Force a newline in a define after the macro name for multi-line defines.
# 
# nl_before_case                  { False, True }
#   Whether to put a newline before 'case' statement, not after the first 'case'.
# 
# nl_before_throw                 { Ignore, Add, Remove, Force }
#   Add or remove newline between ')' and 'throw'.
# 
# nl_after_case                   { False, True }
#   Whether to put a newline after 'case' statement.
# 
# nl_case_colon_brace             { Ignore, Add, Remove, Force }
#   Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
# 
# nl_namespace_brace              { Ignore, Add, Remove, Force }
#   Newline between namespace and {.
# 
# nl_template_class               { Ignore, Add, Remove, Force }
#   Add or remove newline between 'template<>' and whatever follows.
# 
# nl_class_brace                  { Ignore, Add, Remove, Force }
#   Add or remove newline between 'class' and '{'.
# 
# nl_class_init_args              { Ignore, Add, Remove, Force }
#   Add or remove newline before/after each ',' in the base class list,
#     (tied to pos_class_comma).
# 
# nl_constr_init_args             { Ignore, Add, Remove, Force }
#   Add or remove newline after each ',' in the constructor member initialization.
#   Related to nl_constr_colon, pos_constr_colon and pos_constr_comma.
# 
# nl_enum_own_lines               { Ignore, Add, Remove, Force }
#   Add or remove newline before first element, after comma, and after last element in enum.
# 
# nl_func_type_name               { Ignore, Add, Remove, Force }
#   Add or remove newline between return type and function name in a function definition.
# 
# nl_func_type_name_class         { Ignore, Add, Remove, Force }
#   Add or remove newline between return type and function name inside a class {}
#   Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
# 
# nl_func_class_scope             { Ignore, Add, Remove, Force }
#   Add or remove newline between class specification and '::' in 'void A::f() { }'
#   Only appears in separate member implementation (does not appear with in-line implmementation).
# 
# nl_func_scope_name              { Ignore, Add, Remove, Force }
#   Add or remove newline between function scope and name
#   Controls the newline after '::' in 'void A::f() { }'.
# 
# nl_func_proto_type_name         { Ignore, Add, Remove, Force }
#   Add or remove newline between return type and function name in a prototype.
# 
# nl_func_paren                   { Ignore, Add, Remove, Force }
#   Add or remove newline between a function name and the opening '(' in the declaration.
# 
# nl_func_paren_empty             { Ignore, Add, Remove, Force }
#   Overrides nl_func_paren for functions with no parameters.
# 
# nl_func_def_paren               { Ignore, Add, Remove, Force }
#   Add or remove newline between a function name and the opening '(' in the definition.
# 
# nl_func_def_paren_empty         { Ignore, Add, Remove, Force }
#   Overrides nl_func_def_paren for functions with no parameters.
# 
# nl_func_call_paren              { Ignore, Add, Remove, Force }
#   Add or remove newline between a function name and the opening '(' in the call
# 
# nl_func_call_paren_empty        { Ignore, Add, Remove, Force }
#   Overrides nl_func_call_paren for functions with no parameters.
# 
# nl_func_decl_start              { Ignore, Add, Remove, Force }
#   Add or remove newline after '(' in a function declaration.
# 
# nl_func_def_start               { Ignore, Add, Remove, Force }
#   Add or remove newline after '(' in a function definition.
# 
# nl_func_decl_start_single       { Ignore, Add, Remove, Force }
#   Overrides nl_func_decl_start when there is only one parameter.
# 
# nl_func_def_start_single        { Ignore, Add, Remove, Force }
#   Overrides nl_func_def_start when there is only one parameter.
# 
# nl_func_decl_start_multi_line   { False, True }
#   Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines.
# 
# nl_func_def_start_multi_line    { False, True }
#   Whether to add newline after '(' in a function definition if '(' and ')' are in different lines.
# 
# nl_func_decl_args               { Ignore, Add, Remove, Force }
#   Add or remove newline after each ',' in a function declaration.
# 
# nl_func_def_args                { Ignore, Add, Remove, Force }
#   Add or remove newline after each ',' in a function definition.
# 
# nl_func_decl_args_multi_line    { False, True }
#   Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines.
# 
# nl_func_def_args_multi_line     { False, True }
#   Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines.
# 
# nl_func_decl_end                { Ignore, Add, Remove, Force }
#   Add or remove newline before the ')' in a function declaration.
# 
# nl_func_def_end                 { Ignore, Add, Remove, Force }
#   Add or remove newline before the ')' in a function definition.
# 
# nl_func_decl_end_single         { Ignore, Add, Remove, Force }
#   Overrides nl_func_decl_end when there is only one parameter.
# 
# nl_func_def_end_single          { Ignore, Add, Remove, Force }
#   Overrides nl_func_def_end when there is only one parameter.
# 
# nl_func_decl_end_multi_line     { False, True }
#   Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines.
# 
# nl_func_def_end_multi_line      { False, True }
#   Whether to add newline before ')' in a function definition if '(' and ')' are in different lines.
# 
# nl_func_decl_empty              { Ignore, Add, Remove, Force }
#   Add or remove newline between '()' in a function declaration.
# 
# nl_func_def_empty               { Ignore, Add, Remove, Force }
#   Add or remove newline between '()' in a function definition.
# 
# nl_func_call_empty              { Ignore, Add, Remove, Force }
#   Add or remove newline between '()' in a function call.
# 
# nl_func_call_start_multi_line   { False, True }
#   Whether to add newline after '(' in a function call if '(' and ')' are in different lines.
# 
# nl_func_call_args_multi_line    { False, True }
#   Whether to add newline after each ',' in a function call if '(' and ')' are in different lines.
# 
# nl_func_call_end_multi_line     { False, True }
#   Whether to add newline before ')' in a function call if '(' and ')' are in different lines.
# 
# nl_oc_msg_args                  { False, True }
#   Whether to put each OC message parameter on a separate line
#   See nl_oc_msg_leave_one_liner.
# 
# nl_fdef_brace                   { Ignore, Add, Remove, Force }
#   Add or remove newline between function signature and '{'.
# 
# nl_cpp_ldef_brace               { Ignore, Add, Remove, Force }
#   Add or remove newline between C++11 lambda signature and '{'.
# 
# nl_return_expr                  { Ignore, Add, Remove, Force }
#   Add or remove a newline between the return keyword and return expression.
# 
# nl_after_semicolon              { False, True }
#   Whether to put a newline after semicolons, except in 'for' statements.
# 
# nl_paren_dbrace_open            { Ignore, Add, Remove, Force }
#   Java: Control the newline between the ')' and '{{' of the double brace initializer.
# 
# nl_type_brace_init_lst          { Ignore, Add, Remove, Force }
#   Whether to put a newline after the type in an unnamed temporary direct-list-initialization.
# 
# nl_type_brace_init_lst_open     { Ignore, Add, Remove, Force }
#   Whether to put a newline after open brace in an unnamed temporary direct-list-initialization.
# 
# nl_type_brace_init_lst_close    { Ignore, Add, Remove, Force }
#   Whether to put a newline before close brace in an unnamed temporary direct-list-initialization.
# 
# nl_after_brace_open             { False, True }
#   Whether to put a newline after brace open.
#   This also adds a newline before the matching brace close.
# 
# nl_after_brace_open_cmt         { False, True }
#   If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is
#   placed between the open brace and a trailing single-line comment.
# 
# nl_after_vbrace_open            { False, True }
#   Whether to put a newline after a virtual brace open with a non-empty body.
#   These occur in un-braced if/while/do/for statement bodies.
# 
# nl_after_vbrace_open_empty      { False, True }
#   Whether to put a newline after a virtual brace open with an empty body.
#   These occur in un-braced if/while/do/for statement bodies.
# 
# nl_after_brace_close            { False, True }
#   Whether to put a newline after a brace close.
#   Does not apply if followed by a necessary ';'.
# 
# nl_after_vbrace_close           { False, True }
#   Whether to put a newline after a virtual brace close.
#   Would add a newline before return in: 'if (foo) a++; return;'.
# 
# nl_brace_struct_var             { Ignore, Add, Remove, Force }
#   Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
#   Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close.
# 
# nl_define_macro                 { False, True }
#   Whether to alter newlines in '#define' macros.
# 
# nl_squeeze_paren_close          { False, True }
#   Whether to alter newlines between consecutive paren closes, 
#   The number of closing paren in a line will depend on respective open paren lines
# 
# nl_squeeze_ifdef                { False, True }
#   Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs.
# 
# nl_squeeze_ifdef_top_level      { False, True }
#   Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.
# 
# nl_before_if                    { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'if'.
# 
# nl_after_if                     { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'if' statement.
#   Add/Force work only if the next token is not a closing brace.
# 
# nl_before_for                   { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'for'.
# 
# nl_after_for                    { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'for' statement.
# 
# nl_before_while                 { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'while'.
# 
# nl_after_while                  { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'while' statement.
# 
# nl_before_switch                { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'switch'.
# 
# nl_after_switch                 { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'switch' statement.
# 
# nl_before_synchronized          { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'synchronized'.
# 
# nl_after_synchronized           { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'synchronized' statement.
# 
# nl_before_do                    { Ignore, Add, Remove, Force }
#   Add or remove blank line before 'do'.
# 
# nl_after_do                     { Ignore, Add, Remove, Force }
#   Add or remove blank line after 'do/while' statement.
# 
# nl_ds_struct_enum_cmt           { False, True }
#   Whether to double-space commented-entries in struct/union/enum.
# 
# nl_ds_struct_enum_close_brace   { False, True }
#   force nl before } of a struct/union/enum
#   (lower priority than 'eat_blanks_before_close_brace').
# 
# nl_before_func_class_def        Unsigned Number
#   Add or remove blank line before 'func_class_def'.
# 
# nl_before_func_class_proto      Unsigned Number
#   Add or remove blank line before 'func_class_proto'.
# 
# nl_class_colon                  { Ignore, Add, Remove, Force }
#   Add or remove a newline before/after a class colon,
#     (tied to pos_class_colon).
# 
# nl_constr_colon                 { Ignore, Add, Remove, Force }
#   Add or remove a newline around a class constructor colon.
#   Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma.
# 
# nl_namespace_two_to_one_liner   { False, True }
#   If true turns two liner namespace to one liner,else will make then four liners
# 
# nl_create_if_one_liner          { False, True }
#   Change simple unbraced if statements into a one-liner
#   'if(b)\n i++;' => 'if(b) i++;'.
# 
# nl_create_for_one_liner         { False, True }
#   Change simple unbraced for statements into a one-liner
#   'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'.
# 
# nl_create_while_one_liner       { False, True }
#   Change simple unbraced while statements into a one-liner
#   'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'.
# 
# nl_create_func_def_one_liner    { False, True }
#   Change simple 4,3,2 liner function def statements into a one-liner
#   
# 
# nl_split_if_one_liner           { False, True }
#    Change a one-liner if statement into simple unbraced if
#   'if(b) i++;' => 'if(b)\n i++;'.
# 
# nl_split_for_one_liner          { False, True }
#   Change a one-liner for statement into simple unbraced for
#   'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'.
# 
# nl_split_while_one_liner        { False, True }
#   Change a one-liner while statement into simple unbraced while
#   'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'.
# 
# #
# # Blank line options
# #
# 
# nl_max                          Unsigned Number
#   The maximum consecutive newlines (3 = 2 blank lines).
# 
# nl_max_blank_in_func            Unsigned Number
#   The maximum consecutive newlines in function.
# 
# nl_after_func_proto             Unsigned Number
#   The number of newlines after a function prototype, if followed by another function prototype.
# 
# nl_after_func_proto_group       Unsigned Number
#   The number of newlines after a function prototype, if not followed by another function prototype.
# 
# nl_after_func_class_proto       Unsigned Number
#   The number of newlines after a function class prototype, if followed by another function class prototype.
# 
# nl_after_func_class_proto_group Unsigned Number
#   The number of newlines after a function class prototype, if not followed by another function class prototype.
# 
# nl_before_func_body_def         Unsigned Number
#   The number of newlines before a multi-line function def body.
# 
# nl_before_func_body_proto       Unsigned Number
#   The number of newlines before a multi-line function prototype body.
# 
# nl_after_func_body              Unsigned Number
#   The number of newlines after '}' of a multi-line function body.
# 
# nl_after_func_body_class        Unsigned Number
#   The number of newlines after '}' of a multi-line function body in a class declaration.
# 
# nl_after_func_body_one_liner    Unsigned Number
#   The number of newlines after '}' of a single line function body.
# 
# nl_before_block_comment         Unsigned Number
#   The minimum number of newlines before a multi-line comment.
#   Doesn't apply if after a brace open or another multi-line comment.
# 
# nl_before_c_comment             Unsigned Number
#   The minimum number of newlines before a single-line C comment.
#   Doesn't apply if after a brace open or other single-line C comments.
# 
# nl_before_cpp_comment           Unsigned Number
#   The minimum number of newlines before a CPP comment.
#   Doesn't apply if after a brace open or other CPP comments.
# 
# nl_after_multiline_comment      { False, True }
#   Whether to force a newline after a multi-line comment.
# 
# nl_after_label_colon            { False, True }
#   Whether to force a newline after a label's colon.
# 
# nl_after_struct                 Unsigned Number
#   The number of newlines after '}' or ';' of a struct/enum/union definition.
# 
# nl_before_class                 Unsigned Number
#   The number of newlines before a class definition.
# 
# nl_after_class                  Unsigned Number
#   The number of newlines after '}' or ';' of a class definition.
# 
# nl_before_access_spec           Unsigned Number
#   The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
#   Will not change the newline count if after a brace open.
#   0 = No change.
# 
# nl_after_access_spec            Unsigned Number
#   The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label.
#   0 = No change.
#   Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'.
# 
# nl_comment_func_def             Unsigned Number
#   The number of newlines between a function def and the function comment.
#   0 = No change.
# 
# nl_after_try_catch_finally      Unsigned Number
#   The number of newlines after a try-catch-finally block that isn't followed by a brace close.
#   0 = No change.
# 
# nl_around_cs_property           Unsigned Number
#   The number of newlines before and after a property, indexer or event decl.
#   0 = No change.
# 
# nl_between_get_set              Unsigned Number
#   The number of newlines between the get/set/add/remove handlers in C#.
#   0 = No change.
# 
# nl_property_brace               { Ignore, Add, Remove, Force }
#   Add or remove newline between C# property and the '{'.
# 
# eat_blanks_after_open_brace     { False, True }
#   Whether to remove blank lines after '{'.
# 
# eat_blanks_before_close_brace   { False, True }
#   Whether to remove blank lines before '}'.
# 
# nl_remove_extra_newlines        Unsigned Number
#   How aggressively to remove extra newlines not in preproc.
#   0: No change
#   1: Remove most newlines not handled by other config
#   2: Remove all newlines and reformat completely by config
# 
# nl_before_return                { False, True }
#   Whether to put a blank line before 'return' statements, unless after an open brace.
# 
# nl_after_return                 { False, True }
#   Whether to put a blank line after 'return' statements, unless followed by a close brace.
# 
# nl_after_annotation             { Ignore, Add, Remove, Force }
#   Whether to put a newline after a Java annotation statement.
#   Only affects annotations that are after a newline.
# 
# nl_between_annotation           { Ignore, Add, Remove, Force }
#   Controls the newline between two annotations.
# 
# #
# # Positioning options
# #
# 
# pos_arith                       { Ignore, Lead, Trail }
#   The position of arithmetic operators in wrapped expressions.
# 
# pos_assign                      { Ignore, Lead, Trail }
#   The position of assignment in wrapped expressions.
#   Do not affect '=' followed by '{'.
# 
# pos_bool                        { Ignore, Lead, Trail }
#   The position of boolean operators in wrapped expressions.
# 
# pos_compare                     { Ignore, Lead, Trail }
#   The position of comparison operators in wrapped expressions.
# 
# pos_conditional                 { Ignore, Lead, Trail }
#   The position of conditional (b ? t : f) operators in wrapped expressions.
# 
# pos_comma                       { Ignore, Lead, Trail }
#   The position of the comma in wrapped expressions.
# 
# pos_enum_comma                  { Ignore, Lead, Trail }
#   The position of the comma in enum entries.
# 
# pos_class_comma                 { Ignore, Lead, Trail }
#   The position of the comma in the base class list if there are more than one line,
#     (tied to nl_class_init_args).
# 
# pos_constr_comma                { Ignore, Lead, Trail }
#   The position of the comma in the constructor initialization list.
#   Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.
# 
# pos_class_colon                 { Ignore, Lead, Trail }
#   The position of trailing/leading class colon, between class and base class list
#     (tied to nl_class_colon).
# 
# pos_constr_colon                { Ignore, Lead, Trail }
#   The position of colons between constructor and member initialization,
#   (tied to nl_constr_colon).
#   Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.
# 
# #
# # Line Splitting options
# #
# 
# code_width                      Unsigned Number
#   Try to limit code width to N number of columns
# 
# ls_for_split_full               { False, True }
#   Whether to fully split long 'for' statements at semi-colons.
# 
# ls_func_split_full              { False, True }
#   Whether to fully split long function protos/calls at commas.
# 
# ls_code_width                   { False, True }
#   Whether to split lines as close to code_width as possible and ignore some groupings.
# 
# #
# # Code alignment (not left column spaces/tabs)
# #
# 
# align_keep_tabs                 { False, True }
#   Whether to keep non-indenting tabs.
# 
# align_with_tabs                 { False, True }
#   Whether to use tabs for aligning.
# 
# align_on_tabstop                { False, True }
#   Whether to bump out to the next tab when aligning.
# 
# align_number_right              { False, True }
#   Whether to right-align numbers.
# 
# align_keep_extra_space          { False, True }
#   Whether to keep whitespace not required for alignment.
# 
# align_func_params               { False, True }
#   Align variable definitions in prototypes and functions.
# 
# align_func_params_span          Unsigned Number
#   The span for aligning parameter definitions in function on parameter name (0=don't align).
# 
# align_func_params_thresh        Unsigned Number
#   The threshold for aligning function parameter definitions (0=no limit).
# 
# align_func_params_gap           Unsigned Number
#   The gap for aligning function parameter definitions.
# 
# align_same_func_call_params     { False, True }
#   Align parameters in single-line functions that have the same name.
#   The function names must already be aligned with each other.
# 
# align_var_def_span              Unsigned Number
#   The span for aligning variable definitions (0=don't align)
# 
# align_var_def_star_style        Unsigned Number
#   How to align the star in variable definitions.
#    0=Part of the type     'void *   foo;'
#    1=Part of the variable 'void     *foo;'
#    2=Dangling             'void    *foo;'
# 
# align_var_def_amp_style         Unsigned Number
#   How to align the '&' in variable definitions.
#    0=Part of the type
#    1=Part of the variable
#    2=Dangling
# 
# align_var_def_thresh            Unsigned Number
#   The threshold for aligning variable definitions (0=no limit)
# 
# align_var_def_gap               Unsigned Number
#   The gap for aligning variable definitions.
# 
# align_var_def_colon             { False, True }
#   Whether to align the colon in struct bit fields.
# 
# align_var_def_colon_gap         Unsigned Number
#   align variable defs gap for bit colons.
# 
# align_var_def_attribute         { False, True }
#   Whether to align any attribute after the variable name.
# 
# align_var_def_inline            { False, True }
#   Whether to align inline struct/enum/union variable definitions.
# 
# align_assign_span               Unsigned Number
#   The span for aligning on '=' in assignments (0=don't align)
# 
# align_assign_thresh             Unsigned Number
#   The threshold for aligning on '=' in assignments (0=no limit)
# 
# align_enum_equ_span             Unsigned Number
#   The span for aligning on '=' in enums (0=don't align)
# 
# align_enum_equ_thresh           Unsigned Number
#   The threshold for aligning on '=' in enums (0=no limit)
# 
# align_var_class_span            Unsigned Number
#   The span for aligning class (0=don't align)
# 
# align_var_class_thresh          Unsigned Number
#   The threshold for aligning class member definitions (0=no limit).
# 
# align_var_class_gap             Unsigned Number
#   The gap for aligning class member definitions.
# 
# align_var_struct_span           Unsigned Number
#   The span for aligning struct/union (0=don't align)
# 
# align_var_struct_thresh         Unsigned Number
#   The threshold for aligning struct/union member definitions (0=no limit)
# 
# align_var_struct_gap            Unsigned Number
#   The gap for aligning struct/union member definitions.
# 
# align_struct_init_span          Unsigned Number
#   The span for aligning struct initializer values (0=don't align)
# 
# align_typedef_gap               Unsigned Number
#   The minimum space between the type and the synonym of a typedef.
# 
# align_typedef_span              Unsigned Number
#   The span for aligning single-line typedefs (0=don't align).
# 
# align_typedef_func              Unsigned Number
#   How to align typedef'd functions with other typedefs
#   0: Don't mix them at all
#   1: align the open paren with the types
#   2: align the function type name with the other type names
# 
# align_typedef_star_style        Unsigned Number
#   Controls the positioning of the '*' in typedefs. Just try it.
#   0: Align on typedef type, ignore '*'
#   1: The '*' is part of type name: typedef int  *pint;
#   2: The '*' is part of the type, but dangling: typedef int *pint;
# 
# align_typedef_amp_style         Unsigned Number
#   Controls the positioning of the '&' in typedefs. Just try it.
#   0: Align on typedef type, ignore '&'
#   1: The '&' is part of type name: typedef int  &pint;
#   2: The '&' is part of the type, but dangling: typedef int &pint;
# 
# align_right_cmt_span            Unsigned Number
#   The span for aligning comments that end lines (0=don't align)
# 
# align_right_cmt_mix             { False, True }
#   If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment.
# 
# align_right_cmt_gap             Unsigned Number
#   If a trailing comment is more than this number of columns away from the text it follows,
#   it will qualify for being aligned. This has to be > 0 to do anything.
# 
# align_right_cmt_at_col          Unsigned Number
#   Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
# 
# align_func_proto_span           Unsigned Number
#   The span for aligning function prototypes (0=don't align).
# 
# align_func_proto_gap            Unsigned Number
#   Minimum gap between the return type and the function name.
# 
# align_on_operator               { False, True }
#   Align function protos on the 'operator' keyword instead of what follows.
# 
# align_mix_var_proto             { False, True }
#   Whether to mix aligning prototype and variable declarations.
#   If True, align_var_def_XXX options are used instead of align_func_proto_XXX options.
# 
# align_single_line_func          { False, True }
#   Align single-line functions with function prototypes, uses align_func_proto_span.
# 
# align_single_line_brace         { False, True }
#   Aligning the open brace of single-line functions.
#   Requires align_single_line_func=True, uses align_func_proto_span.
# 
# align_single_line_brace_gap     Unsigned Number
#   Gap for align_single_line_brace.
# 
# align_oc_msg_spec_span          Unsigned Number
#   The span for aligning ObjC msg spec (0=don't align)
# 
# align_nl_cont                   { False, True }
#   Whether to align macros wrapped with a backslash and a newline.
#   This will not work right if the macro contains a multi-line comment.
# 
# align_pp_define_together        { False, True }
#   # Align macro functions and variables together.
# 
# align_pp_define_gap             Unsigned Number
#   The minimum space between label and value of a preprocessor define.
# 
# align_pp_define_span            Unsigned Number
#   The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
# 
# align_left_shift                { False, True }
#   Align lines that start with '<<' with previous '<<'. Default=True.
# 
# align_asm_colon                 { False, True }
#   Align text after asm volatile () colons.
# 
# align_oc_msg_colon_span         Unsigned Number
#   Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
# 
# align_oc_msg_colon_first        { False, True }
#   If True, always align with the first parameter, even if it is too short.
# 
# align_oc_decl_colon             { False, True }
#   Aligning parameters in an Obj-C '+' or '-' declaration on the ':'.
# 
# #
# # Comment modifications
# #
# 
# cmt_width                       Unsigned Number
#   Try to wrap comments at cmt_width columns
# 
# cmt_reflow_mode                 Unsigned Number
#   Set the comment reflow mode (Default=0)
#   0: no reflowing (apart from the line wrapping due to cmt_width)
#   1: no touching at all
#   2: full reflow
# 
# cmt_convert_tab_to_spaces       { False, True }
#   Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
# 
# cmt_indent_multi                { False, True }
#   If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars.
#   Default=True.
# 
# cmt_c_group                     { False, True }
#   Whether to group c-comments that look like they are in a block.
# 
# cmt_c_nl_start                  { False, True }
#   Whether to put an empty '/*' on the first line of the combined c-comment.
# 
# cmt_c_nl_end                    { False, True }
#   Whether to put a newline before the closing '*/' of the combined c-comment.
# 
# cmt_cpp_group                   { False, True }
#   Whether to group cpp-comments that look like they are in a block.
# 
# cmt_cpp_nl_start                { False, True }
#   Whether to put an empty '/*' on the first line of the combined cpp-comment.
# 
# cmt_cpp_nl_end                  { False, True }
#   Whether to put a newline before the closing '*/' of the combined cpp-comment.
# 
# cmt_cpp_to_c                    { False, True }
#   Whether to change cpp-comments into c-comments.
# 
# cmt_star_cont                   { False, True }
#   Whether to put a star on subsequent comment lines.
# 
# cmt_sp_before_star_cont         Unsigned Number
#   The number of spaces to insert at the start of subsequent comment lines.
# 
# cmt_sp_after_star_cont          Number
#   The number of spaces to insert after the star on subsequent comment lines.
# 
# cmt_multi_check_last            { False, True }
#   For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
#   the comment are the same length. Default=True.
# 
# cmt_multi_first_len_minimum     Unsigned Number
#   For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
#   the comment are the same length AND if the length is bigger as the first_len minimum. Default=4
# 
# cmt_insert_file_header          String
#   The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
#   Will substitute $(filename) with the current file's name.
# 
# cmt_insert_file_footer          String
#   The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
#   Will substitute $(filename) with the current file's name.
# 
# cmt_insert_func_header          String
#   The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
#   Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
#   Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }.
# 
# cmt_insert_class_header         String
#   The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
#   Will substitute $(class) with the class name.
# 
# cmt_insert_oc_msg_header        String
#   The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
#   Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
# 
# cmt_insert_before_preproc       { False, True }
#   If a preprocessor is encountered when stepping backwards from a function name, then
#   this option decides whether the comment should be inserted.
#   Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
# 
# cmt_insert_before_inlines       { False, True }
#   If a function is declared inline to a class definition, then
#   this option decides whether the comment should be inserted.
#   Affects cmt_insert_func_header.
# 
# cmt_insert_before_ctor_dtor     { False, True }
#   If the function is a constructor/destructor, then
#   this option decides whether the comment should be inserted.
#   Affects cmt_insert_func_header.
# 
# #
# # Code modifying options (non-whitespace)
# #
# 
# mod_full_brace_do               { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line 'do' statement.
# 
# mod_full_brace_for              { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line 'for' statement.
# 
# mod_full_brace_function         { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line function definitions. (Pawn).
# 
# mod_full_brace_if               { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
# 
# mod_full_brace_if_chain         { False, True }
#   Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
#   If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.
# 
# mod_full_brace_if_chain_only    { False, True }
#   Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced.
#   If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces,
#   and simple 'if' statements will lose them (if possible).
# 
# mod_full_brace_nl               Unsigned Number
#   Don't remove braces around statements that span N newlines
# 
# mod_full_brace_nl_block_rem_mlcond { False, True }
#   Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines.
# 
# mod_full_brace_while            { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line 'while' statement.
# 
# mod_full_brace_using            { Ignore, Add, Remove, Force }
#   Add or remove braces on single-line 'using ()' statement.
# 
# mod_paren_on_return             { Ignore, Add, Remove, Force }
#   Add or remove unnecessary paren on 'return' statement.
# 
# mod_pawn_semicolon              { False, True }
#   Whether to change optional semicolons to real semicolons.
# 
# mod_full_paren_if_bool          { False, True }
#   Add parens on 'while' and 'if' statement around bools.
# 
# mod_remove_extra_semicolon      { False, True }
#   Whether to remove superfluous semicolons.
# 
# mod_add_long_function_closebrace_comment Unsigned Number
#   If a function body exceeds the specified number of newlines and doesn't have a comment after
#   the close brace, a comment will be added.
# 
# mod_add_long_namespace_closebrace_comment Unsigned Number
#   If a namespace body exceeds the specified number of newlines and doesn't have a comment after
#   the close brace, a comment will be added.
# 
# mod_add_long_class_closebrace_comment Unsigned Number
#   If a class body exceeds the specified number of newlines and doesn't have a comment after
#   the close brace, a comment will be added.
# 
# mod_add_long_switch_closebrace_comment Unsigned Number
#   If a switch body exceeds the specified number of newlines and doesn't have a comment after
#   the close brace, a comment will be added.
# 
# mod_add_long_ifdef_endif_comment Unsigned Number
#   If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
#   the #endif, a comment will be added.
# 
# mod_add_long_ifdef_else_comment Unsigned Number
#   If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
#   the #else, a comment will be added.
# 
# mod_sort_import                 { False, True }
#   If True, will sort consecutive single-line 'import' statements [Java, D].
# 
# mod_sort_using                  { False, True }
#   If True, will sort consecutive single-line 'using' statements [C#].
# 
# mod_sort_include                { False, True }
#   If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
#   This is generally a bad idea, as it may break your code.
# 
# mod_move_case_break             { False, True }
#   If True, it will move a 'break' that appears after a fully braced 'case' before the close brace.
# 
# mod_case_brace                  { Ignore, Add, Remove, Force }
#   Will add or remove the braces around a fully braced case statement.
#   Will only remove the braces if there are no variable declarations in the block.
# 
# mod_remove_empty_return         { False, True }
#   If True, it will remove a void 'return;' that appears as the last statement in a function.
# 
# mod_sort_oc_properties          { False, True }
#   If True, it will organize the properties (Obj-C).
# 
# mod_sort_oc_property_class_weight Number
#   Determines weight of class property modifier (Obj-C).
# 
# mod_sort_oc_property_thread_safe_weight Number
#   Determines weight of atomic, nonatomic (Obj-C).
# 
# mod_sort_oc_property_readwrite_weight Number
#   Determines weight of readwrite (Obj-C).
# 
# mod_sort_oc_property_reference_weight Number
#   Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C).
# 
# mod_sort_oc_property_getter_weight Number
#   Determines weight of getter type (getter=) (Obj-C).
# 
# mod_sort_oc_property_setter_weight Number
#   Determines weight of setter type (setter=) (Obj-C).
# 
# mod_sort_oc_property_nullability_weight Number
#   Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C).
# 
# #
# # Preprocessor options
# #
# 
# pp_indent                       { Ignore, Add, Remove, Force }
#   Control indent of preprocessors inside #if blocks at brace level 0 (file-level).
# 
# pp_indent_at_level              { False, True }
#   Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False).
# 
# pp_indent_count                 Unsigned Number
#   Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
#   If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
#   Default=1.
# 
# pp_space                        { Ignore, Add, Remove, Force }
#   Add or remove space after # based on pp_level of #if blocks.
# 
# pp_space_count                  Unsigned Number
#   Sets the number of spaces added with pp_space.
# 
# pp_indent_region                Number
#   The indent for #region and #endregion in C# and '#pragma region' in C/C++.
#   negative value are OK.
# 
# pp_region_indent_code           { False, True }
#   Whether to indent the code between #region and #endregion.
# 
# pp_indent_if                    Number
#   If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level.
#   0:  indent preprocessors using output_tab_size.
#   >0: column at which all preprocessors will be indented.
#   negative value are OK.
# 
# pp_if_indent_code               { False, True }
#   Control whether to indent the code between #if, #else and #endif.
# 
# pp_define_at_level              { False, True }
#   Whether to indent '#define' at the brace level (True) or from column 1 (false).
# 
# pp_ignore_define_body           { False, True }
#   Whether to ignore the '#define' body while formatting.
# 
# pp_indent_case                  { False, True }
#   Whether to indent case statements between #if, #else, and #endif.
#   Only applies to the indent of the preprocesser that the case statements directly inside of.
# 
# pp_indent_func_def              { False, True }
#   Whether to indent whole function definitions between #if, #else, and #endif.
#   Only applies to the indent of the preprocesser that the function definition is directly inside of.
# 
# pp_indent_extern                { False, True }
#   Whether to indent extern C blocks between #if, #else, and #endif.
#   Only applies to the indent of the preprocesser that the extern block is directly inside of.
# 
# pp_indent_brace                 { False, True }
#   Whether to indent braces directly inside #if, #else, and #endif.
#   Only applies to the indent of the preprocesser that the braces are directly inside of.
# 
# #
# # Sort includes options
# #
# 
# include_category_0              String
#   The regex for include category with priority 0.
# 
# include_category_1              String
#   The regex for include category with priority 1.
# 
# include_category_2              String
#   The regex for include category with priority 2.
# 
# #
# # Use or Do not Use options
# #
# 
# use_indent_func_call_param      { False, True }
#   True:  indent_func_call_param will be used (default)
#   False: indent_func_call_param will NOT be used.
# 
# use_indent_continue_only_once   { False, True }
#   The value of the indentation for a continuation line is calculate differently if the statement is:
#     a declaration: your case with QString fileName ...
#     an assignment: your case with pSettings = new QSettings( ...
#   At the second case the indentation value might be used twice:
#     at the assignment
#     at the function call (if present)
#   To prevent the double use of the indentation value, use this option with the value 'True'.
#   True:  indent_continue will be used only once
#   False: indent_continue will be used every time (default).
# 
# indent_cpp_lambda_only_once     { False, True }
#   the value might be used twice:
#     at the assignment
#     at the opening brace
#   To prevent the double use of the indentation value, use this option with the value 'True'.
#   True:  indentation will be used only once
#   False: indentation will be used every time (default).
# 
# use_options_overriding_for_qt_macros { False, True }
#   SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details.
#   Default=True.
# 
# #
# # Warn levels - 1: error, 2: warning (default), 3: note
# #
# 
# warn_level_tabs_found_in_verbatim_string_literals Unsigned Number
#   Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal.
# 
# 
# # Meaning of the settings:
# #   Ignore - do not do any changes
# #   Add    - makes sure there is 1 or more space/brace/newline/etc
# #   Force  - makes sure there is exactly 1 space/brace/newline/etc,
# #            behaves like Add in some contexts
# #   Remove - removes space/brace/newline/etc
# #
# #
# # - Token(s) can be treated as specific type(s) with the 'set' option:
# #     `set tokenType tokenString [tokenString...]`
# #
# #     Example:
# #       `set BOOL __AND__ __OR__`
# #
# #     tokenTypes are defined in src/token_enum.h, use them without the
# #     'CT_' prefix: 'CT_BOOL' -> 'BOOL'
# #
# #
# # - Token(s) can be treated as type(s) with the 'type' option.
# #     `type tokenString [tokenString...]`
# #
# #     Example:
# #       `type int c_uint_8 Rectangle`
# #
# #     This can also be achieved with `set TYPE int c_uint_8 Rectangle`
# #
# #
# # To embed whitespace in tokenStrings use the '\' escape character, or quote
# # the tokenStrings. These quotes are supported: "'`
# #
# #
# # - Support for the auto detection of languages through the file ending can be
# #   added using the 'file_ext' command.
# #     `file_ext langType langString [langString..]`
# #
# #     Example:
# #       `file_ext CPP .ch .cxx .cpp.in`
# #
# #     langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
# #     them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP'
# #
# #
# # - Custom macro-based indentation can be set up using 'macro-open',
# #   'macro-else' and 'macro-close'.
# #     `(macro-open | macro-else | macro-close) tokenString`
# #
# #     Example:
# #       `macro-open  BEGIN_TEMPLATE_MESSAGE_MAP`
# #       `macro-open  BEGIN_MESSAGE_MAP`
# #       `macro-close END_MESSAGE_MAP`
# #
# #