vega-power-control

#!/bin/bash
#
# Script to set AMD Vega clock/voltage/profile settings.
#
#  authored-by: Aaron Echols
#        email: atechols at gmail dot com
#
#  NOTES:
#
#  This script has been released under the GNU GENERAL PUBLIC LICENSE.
#  Please contribute to the upstream author at:
#  https://github.com/dasunsrule32/radeon-scripts
#
#  Install Instructions:
#
#  https://github.com/dasunsrule32/radeon-scripts/blob/master/systemd/INSTALL-vega-power-control.md
#

# Variables:
# ----------
DEBUG=0 # Enable (1) or Disable (0) DEBUG.
AMDSYSFILE="power_dpm_force_performance_level" # ADM SYSFS file to search for.
SYSPATH=$(awk '{print}' <<< `find /sys/devices -name $AMDSYSFILE -type f -exec dirname {} \;`) # Autodetect SYSFS path.
HWMONPATH="hwmon/hwmon0"
KERNELVER=$(awk -F. '{print $1$2}' <<< `uname -r`) # Get kernel version.
KERNELREQ="415" # Minimum required kernel version for script.
KERNELREQPOW="420" # Kernel version required for POWERCAP control.
POWERCAP="0" # Enable (1) or Disable (0) AMD powercap settings, requires DEFAULTDPMPERFLVL set to manual.
DEFAULTDPMSTATE="balanced" # Set power profile, options: battery (Won't work with discrete cards), balanced, performance.
DEFAULTDPMPERFLVL="auto" # Default to auto, possible options are: auto, low, high, manual. See docs for more options.
HWDEVID=`cut -c 3- <<< cat $SYSPATH/device` # Get device ID for card.
SUBSYSDEV=`cut -c 3- <<< cat $SYSPATH/subsystem_device` # Get Subsystem device ID for card.
SUBSYSVEN=`cut -c 3- <<< cat $SYSPATH/subsystem_vendor` # Get Subsystem vendor ID for card.
SUBSYSID="$SUBSYSVEN:$SUBSYSDEV" # Get Subsystem ID for card.
HWID="$SUBSYSVEN:$HWDEVID" # Get hardware ID for card.

# Constant Variables:
# ------------------
# Vendor IDs:
# Reference: https://www.amd.com/en/support/kb/faq/gpu-55#faq-Subsystem-Vendor-ID-and-Device-ID
# Device hunt: https://devicehunt.com
AMD="1002"
ASUSTEK="1043"
CLUB3D="196D"
DIAMOND="1092"
GECUBE="18BC"
GIGABYTE="17AF"
HIS="17AF"
JETWAY="16F3"
MSI="1462"
SAPPHIRE="1DA2"
POWERCOLOR="148C"
VISIONTEK="1545"
XFX="1682"
ACER="1025"
APPLE="106B"
DELL="1028"
GATEWAY="107B"
HP="103C"
LENOVO="17AA"
SONY="104D"
TOSHIBA="1179"

# Functions:
# ----------
# Echo a string value that is passed
echo_text() {
   echo -e >&2 "$@";
}

# Main body:
# ----------
# Check if root:
if [[ $EUID -ne 0 ]]; then
   echo_text "You need to be root to run this script..."
   exit 1
fi

# Check if kernel version is new enough:
if [ $KERNELVER -lt $KERNELREQ ]; then
   echo_text "Kernel is too old, exiting..."
   exit 2
else
   echo_text "Kernel requirements met, continuing..."
fi

# Echo Hardware/Subsystem ID when DEBUG is enabled:
if [ $DEBUG -eq 1 ]; then
   echo_text "Device ID: $HWID"
   echo_text "Subsystem ID: $SUBSYSID"
fi

# Set profile (auto|manual):
if [ "$DEFAULTDPMPERFLVL" == "auto" ]; then
   POWERDPMPERFLVL=`cat $SYSPATH/power_dpm_force_performance_level`
   if [ $DEBUG -eq 1 ]; then
      echo_text "Current state: $POWERDPMPERFLVL"
   fi
   # Set back to defaults if manual profile was set previously:
   if [ "$POWERDPMPERFLVL" != "auto" ]; then
      echo_text "Restoring to factory default settings..."
      echo "$DEFAULTDPMPERFLVL" > "$SYSPATH/power_dpm_force_performance_level"
      echo "r" > "$SYSPATH/pp_od_clk_voltage"
      echo "c" > "$SYSPATH/pp_od_clk_voltage"
   fi
   # power_dpm_state is for older AMD cards only.
   # FROM THE DOCS: The power_dpm_state file is a legacy interface and is
   # only provided for backwards compatibility.
   #
   # TODO: Set a check on this block to differentiate
   # VEGA/POLARIS, etc.
   echo_text "Setting profile to: $DEFAULTDPMSTATE..."
   echo "$DEFAULTDPMSTATE" > "$SYSPATH/power_dpm_state"
elif [ "$DEFAULTDPMPERFLVL" == "manual" ]; then
   # TODO: Add for loop to use custom values for p-states, clocks and volt-
   # ages per device. We can use an array to get the values for specific cards.
   # This will require the refactoring of device/model detection.
   #
   # Set GPU frequencies/voltages:
   echo_text "Applying custom power settings..."
   echo "$DEFAULTDPMPERFLVL" > "$SYSPATH/power_dpm_force_performance_level"
   echo "s 0 852 800" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 1 991 900" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 2 1084 910" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 3 1138 930" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 4 1200 945" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 5 1400 955" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 6 1500 970" > "$SYSPATH/pp_od_clk_voltage"
   echo "s 7 1600 1000" > "$SYSPATH/pp_od_clk_voltage"

   # Set memory frequencies/voltages:
   echo "m 0 167 800" > "$SYSPATH/pp_od_clk_voltage"
   echo "m 1 500 850" > "$SYSPATH/pp_od_clk_voltage"
   echo "m 2 800 910" > "$SYSPATH/pp_od_clk_voltage"
   echo "m 3 1000 1000" > "$SYSPATH/pp_od_clk_voltage"

   # Set Power consumption - Requires Kernel 4.20+:
   if [ $KERNELVER -ge $KERNELREQPOW ]; then
      if [ $DEBUG -eq 1 ]; then
         echo_text "Kernel Version: $KERNELVER"
      fi
      if [ $POWERCAP -eq 1 ]; then
         echo_text "Adjusting AMD Power Cap"
         # To set the allowed maximum power consumption of the GPU to e.g. 220 Watts (Default wattage):
         echo 220000000 > "$SYSPATH/$HWMONPATH/power1_cap"
      fi
   fi
   # Commit power changes:
   echo "c" > "$SYSPATH/pp_od_clk_voltage"
fi