build: update Lotus Node & Miner version to v1.31.1-dev in master (#12692)

* build: update Lotus Node & Miner version to v1.31.1-dev in master

build: update Lotus Node & Miner version to v1.31.1-dev in master

* chore: update changelog

chore: update changelog

Author: rjan90

CHANGELOG.md

@@ -2,38 +2,9 @@
 
 # UNRELEASED
 
-## New features
-- New ChainIndexer subsystem to index Filecoin chain state such as tipsets, messages, events and ETH transactions for accurate and faster RPC responses. The `ChainIndexer` replaces the existing `MsgIndex`, `EthTxHashLookup` and `EventIndex` implementations in Lotus, which [suffer from a multitude of known problems](https://github.com/filecoin-project/lotus/issues/12293).  If you are an RPC provider or a node operator who uses or exposes Ethereum and/or events APIs, please refer to the [ChainIndexer documentation for operators](./documentation/en/chain-indexer-overview-for-operators.md) for information on how to enable, configure and use the new Indexer.  While there is no automated data migration and one can upgrade and downgrade without backups, there are manual steps that need to be taken to backfill data when upgrading to this Lotus version, or downgrading to the previous version without ChainIndexer. Please be aware that that this feature removes some options in the Lotus configuration file, if these have been set, Lotus will report an error when starting. See the documentation for more information.
-- Return a consistent error when encountering null rounds in ETH RPC method calls. ([filecoin-project/lotus#12655](https://github.com/filecoin-project/lotus/pull/12655))
-- Reduce size of embedded genesis CAR files by removing WASM actor blocks and compressing with zstd. This reduces the `lotus` binary size by approximately 10 MiB. ([filecoin-project/lotus#12439](https://github.com/filecoin-project/lotus/pull/12439))
-- Add ChainSafe operated Calibration archival node to the bootstrap list ([filecoin-project/lotus#12517](https://github.com/filecoin-project/lotus/pull/12517))
-- `lotus chain head` now supports a `--height` flag to print just the epoch number of the current chain head ([filecoin-project/lotus#12609](https://github.com/filecoin-project/lotus/pull/12609))
-- `lotus-shed indexes inspect-indexes` now performs a comprehensive comparison of the event index data for each message by comparing the AMT root CID from the message receipt with the root of a reconstructed AMT. Previously `inspect-indexes` simply compared event counts, comparing AMT roots confirms all the event data is byte-perfect. ([filecoin-project/lotus#12570](https://github.com/filecoin-project/lotus/pull/12570))
-- Expose APIs to list the miner IDs that are currently participating in F3 via node. ([filecoin-project/lotus#12608](https://github.com/filecoin-project/lotus/pull/12608))
-- Implement new `lotus f3` CLI commands to list F3 participants, dump manifest, get/list finality certificates and check the F3 status. ([filecoin-project/lotus#12617](https://github.com/filecoin-project/lotus/pull/12617), [filecoin-project/lotus#12627](https://github.com/filecoin-project/lotus/pull/12627))
-- Return a `"data"` field on the `"error"` returned from RPC when `eth_call` and `eth_estimateGas` APIs encounter `execution reverted` errors. ([filecoin-project/lotus#12553](https://github.com/filecoin-project/lotus/pull/12553))
-- Implement `EthGetTransactionByBlockNumberAndIndex` (`eth_getTransactionByBlockNumberAndIndex`) and `EthGetTransactionByBlockHashAndIndex` (`eth_getTransactionByBlockHashAndIndex`) methods. ([filecoin-project/lotus#12618](https://github.com/filecoin-project/lotus/pull/12618))
-- Add a set of `lotus-shed datastore` commands for importing, exporting, and clearing parts of the datastore ([filecoin-project/lotus#12685](https://github.com/filecoin-project/lotus/pull/12685)):
-
-## Bug Fixes
-- Fix a bug in the `lotus-shed indexes backfill-events` command that may result in either duplicate events being backfilled where there are existing events (such an operation *should* be idempotent) or events erroneously having duplicate `logIndex` values when queried via ETH APIs. ([filecoin-project/lotus#12567](https://github.com/filecoin-project/lotus/pull/12567))
-- Event APIs (Eth events and actor events) should only return reverted events if client queries by specific block hash / tipset. Eth and actor event subscription APIs should always return reverted events to enable accurate observation of real-time changes. ([filecoin-project/lotus#12585](https://github.com/filecoin-project/lotus/pull/12585))
-- Add logic to check if the miner's owner address is delegated (f4 address). If it is delegated, the `lotus-shed sectors termination-estimate` command now sends the termination state call using the worker ID. This fix resolves the issue where termination-estimate did not function correctly for miners with delegated owner addresses. ([filecoin-project/lotus#12569](https://github.com/filecoin-project/lotus/pull/12569))
-- Fix hotloop in F3 pariticpation API ([filecoin-project/lotus#12575](https://github.com/filecoin-project/lotus/pull/12575))
-- Fix a bug in F3 participation API where valid leases may get removed due to dynamic manifest update. ([filecoin-project/lotus#12597](https://github.com/filecoin-project/lotus/pull/12597))
-- Change the F3 participation ticket encoding to allow parity testing across non-go implementations, where a ticket issued by Lotus may need to be decoded by, for example, Forest . The changes also enforce the minimum instance participation of 1 for miners. ([filecoin-project/lotus#12615](https://github.com/filecoin-project/lotus/pull/12615))
-- Fix issue where F3 wouldn't start participating again if Lotus restarted without restarting the Miner ([filecoin-project/lotus#12640](https://github.com/filecoin-project/lotus/pull/12640)).
-- Change the F3 HeadLookback parameter to 4 ([filecoin-project/lotus#12648](https://github.com/filecoin-project/lotus/pull/12648)).
-- Upgrade go-f3 to 0.7.1 to resolve Tipset not found errors when trying to establish instance start time ([filecoin-project/lotus#12651](https://github.com/filecoin-project/lotus/pull/12651)).
-- Try harder in the F3 participation loop to participate using the same lotus node ([filecoin-project/lotus#12664](https://github.com/filecoin-project/lotus/pull/12664)).
-- The mining loop will now correctly "stick" to the same upstream lotus node for all operations pertaining to mining a single block ([filecoin-project/lotus#12665](https://github.com/filecoin-project/lotus/pull/12665)).
-- Make the ordering of event output for `eth_` APIs and `GetActorEventsRaw` consistent, sorting ascending on: epoch, message index, event index and original event entry order. ([filecoin-project/lotus#12623](https://github.com/filecoin-project/lotus/pull/12623))
-
-## Changes
-
-- The Lotus Miner will now always mine on the latest chain head returned by lotus, even if that head has less "weight" than the previously seen head. This is necessary because F3 may end up finalizing a tipset with a lower weight, although this situation should be rare on the Filecoin mainnet. ([filecoin-project/lotus#12659](https://github.com/filecoin-project/lotus/pull/12659))
+# UNRELEASED v1.31.0
 
-## Deps
+See https://github.com/filecoin-project/lotus/blob/release/v1.31.0/CHANGELOG.md
 
 # Node and Miner v1.30.0 / 2024-11-06
 

build/openrpc/full.json

@@ -2,7 +2,7 @@
     "openrpc": "1.2.6",
     "info": {
         "title": "Lotus RPC API",
-        "version": "1.30.1-dev"
+        "version": "1.31.1-dev"
     },
     "methods": [
         {

build/openrpc/gateway.json

@@ -2,7 +2,7 @@
     "openrpc": "1.2.6",
     "info": {
         "title": "Lotus RPC API",
-        "version": "1.30.1-dev"
+        "version": "1.31.1-dev"
     },
     "methods": [
         {

build/openrpc/miner.json

@@ -2,7 +2,7 @@
     "openrpc": "1.2.6",
     "info": {
         "title": "Lotus RPC API",
-        "version": "1.30.1-dev"
+        "version": "1.31.1-dev"
     },
     "methods": [
         {

build/openrpc/worker.json

@@ -2,7 +2,7 @@
     "openrpc": "1.2.6",
     "info": {
         "title": "Lotus RPC API",
-        "version": "1.30.1-dev"
+        "version": "1.31.1-dev"
     },
     "methods": [
         {

build/version.go

@@ -7,7 +7,7 @@ import (
 )
 
 // NodeBuildVersion is the local build version of the Lotus daemon
-const NodeBuildVersion string = "1.30.1-dev"
+const NodeBuildVersion string = "1.31.1-dev"
 
 func NodeUserVersion() BuildVersion {
 	if os.Getenv("LOTUS_VERSION_IGNORE_COMMIT") == "1" {
@@ -18,7 +18,7 @@ func NodeUserVersion() BuildVersion {
 }
 
 // MinerBuildVersion is the local build version of the Lotus miner
-const MinerBuildVersion = "1.30.1-dev"
+const MinerBuildVersion = "1.31.1-dev"
 
 func MinerUserVersion() BuildVersion {
 	if os.Getenv("LOTUS_VERSION_IGNORE_COMMIT") == "1" {

documentation/en/cli-lotus-miner.md

@@ -7,7 +7,7 @@ USAGE:
    lotus-miner [global options] command [command options] [arguments...]
 
 VERSION:
-   1.30.1-dev
+   1.31.1-dev
 
 COMMANDS:
    init          Initialize a lotus miner repo

documentation/en/cli-lotus-worker.md

@@ -7,7 +7,7 @@ USAGE:
    lotus-worker [global options] command [command options] [arguments...]
 
 VERSION:
-   1.30.1-dev
+   1.31.1-dev
 
 COMMANDS:
    run        Start lotus worker

documentation/en/cli-lotus.md

@@ -7,7 +7,7 @@ USAGE:
    lotus [global options] command [command options] [arguments...]
 
 VERSION:
-   1.30.1-dev
+   1.31.1-dev
 
 COMMANDS:
    daemon   Start a lotus daemon process