Config thermostat

[Achy7]

Hello all,

climate:
  name: Termostato 380 Valliant
  max_temp: 30
  min_temp: 5
  precision: 0.1
  temp_step: 0.5
  modes:
   - auto
   - heat
   - cool
   - 'off'
  mode_state_template: >-
    {% set values = { 'auto':'auto', 'day':'heat', 'night':'cool', 'off':'off'} %}
    {% set state = value_json["opmode"].value %}
    {{ values[state] if state in values.keys() else 'off' }}
  mode_state_topic: "ebusd/ctlv0/z1OpMode"
  mode_command_template: >-
    {% set values = { 'auto':'auto', 'heat':'day', 'cool':'night', 'off':'off'} %}
    {{ values[value] if value in values.keys() else 'auto' }}
  mode_command_topic: "ebusd/ctlv0/z1OpMode/set"
  current_temperature_topic: "ebusd/ctlv0/z1RoomTemp"
  current_temperature_template: '{{value_json["tempv"].value}}'
  temperature_state_topic: "ebusd/ctlv0/z1ActualRoomTempDesired/set"
  temperature_state_template: '{{value_json["tempv"].value}}'
  temperature_low_state_topic: "ebusd/ctlv0/z1NightTemp"
  temperature_low_state_template: '{{value_json["tempv"].value}}'
  temperature_high_state_topic: "ebusd/ctlv0/z1DayTemp"
  temperature_high_state_template: '{{value_json["tempv"].value}}'

i config that 👍

homeassistant -> valliant
1 work when on , off , and other mode
2 temperature room is correct

NO WORK
valliant -. homeassistant : dont see actual mode on valliant
dont work temperature desiderad

Can suggest me ?

[pepsonEL]

Did you found solution ?

[Koky05]

It hard to say where is problem because we can not see your mqtt mesages, but in my case is state in different hierarchy:
{% set state = value_json['0']['value'] %}

For temperature desire skip "/set" part, like this (set is only for commands):
temperature_state_topic: "ebusd/ctlv0/z1ActualRoomTempDesired"

My end of config:

    mode_command_topic: "ebusd/f47/Hc1OPMode/set"
    value_template: "{{ value_json.temp1.value }}"
    temperature_state_topic: "ebusd/f47/DisplayedHc1RoomTempDesired"
    temperature_low_state_topic: "ebusd/f47/Hc1NightTemp"
    temperature_high_state_topic: "ebusd/f47/Hc1DayTemp"
    temperature_low_command_topic: "ebusd/f47/Hc1NightTemp/set"
    temperature_high_command_topic: "ebusd/f47/Hc1DayTemp/set"
    current_temperature_topic: "ebusd/f47/DisplayedRoomTemp"
    current_temperature_template: "{{ (value_json.temp.value | float(0)) }}"

[pepsonEL]

Did you resolved your problem ?

[pepsonEL]

How i can get status for sensor which has 1 or 0 value ? It looks in mqtt explorer as:
Hc1PumpStatus = { "0": {"name": "", "value": 1}}
get = 1

For thermostat i have this and it works:

• name: "Parter podłogówka"
  max_temp: 30
  min_temp: 5
  precision: 0.1
  temp_step: 0.5
  modes:
  • "auto"
  • "heat"
  • "cool"
  • "off"
    mode_state_template: >-
    {% set values = { 'auto':'auto', 'day':'heat', 'night':'cool', 'off':'off'} %}
    {% set state = value_json["opmode"].value %}
    {{ values[state] if state in values.keys() else 'off' }}
    mode_state_topic: "ebusd/700/z2OpMode"
    mode_command_topic: "ebusd/700/z2OpMode/set"
    mode_command_template: >-
    {% set values = { 'auto':'auto', 'heat':'day', 'cool':'night', 'off':'off'} %}
    {{ values[value] if value in values.keys() else 'auto' }}
    temperature_low_state_topic: "ebusd/700/z2NightTemp"
    temperature_low_state_template: '{{value_json["tempv"].value}}'
    temperature_high_state_topic: "ebusd/700/z2DayTemp"
    temperature_high_state_template: '{{value_json["tempv"].value}}'
    temperature_low_command_topic: "ebusd/700/z2NightTemp/set"
    temperature_high_command_topic: "ebusd/700/z2DayTemp/set"
    current_temperature_topic: "ebusd/700/z2RoomTemp"
    current_temperature_template: '{{value_json["tempv"].value}}'