calorMATIC 630 (VRC630)

[bofruehw]

Please is calorMATIC 630 (VRC630) supported?
I have problems connecting it, a lot of unknown CMD...

[doofy]

I think it is mostly supported but a small part is missing. I did not investigate further but this is what works out of the box:

$ docker-compose exec ebusd ebusctl info
                                                                                                           
version: ebusd 22.4.v22.4
update check: version 23.1 available
device: ebus-adapter:9999, enhanced
signal: acquired
symbol rate: 21
max symbol rate: 74190
min arbitration micros: 1
max arbitration micros: 976
min symbol latency: 5
max symbol latency: 67
reconnects: 0
masters: 3
messages: 536
conditional: 12
poll: 114
update: 10
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=UI   ;SW=0307;HW=6201", loaded "vaillant/15.ui.csv"
address 23: slave, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301", loaded "vaillant/23.vr630.cc.csv"
address 25: slave, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301", loaded "vaillant/25.vr630.hwc.csv"
address 26: slave, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301", loaded "vaillant/26.vr630.hc.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 3f: master #23
address 44: slave #23, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301"
address 50: slave, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301", loaded "vaillant/50.vr630.mc.csv"
address 51: slave, scanned "MF=Vaillant;ID=VR630;SW=0302;HW=6301", loaded "vaillant/51.vr630.mc.3.csv"

[bofruehw]

Thank you.
I'm using Home Assistant eBUSd 23.1 with a homemade adapter with ESP-01S on the prototype board. On the oscilloscope, communication is quite ok (I believe). Signal eBUSd 3 log file is alright, the signal is acquired and stable, and the wifi is excellent. In hassio, as I know, I can play only with latency and it seems to have no influence. Currently, only calorMATIC is on the bus because it is connected to the boiler with 7-8-9 (should be rewired in the future).
From log file after 2023-01-11 09:39:30.229 is clear that "no file from vaillant with prefix 84 matches ID "vr630", SW0306, HW6301" .

Ans idea?

The log file after reset is:
2023-01-11 09:39:08.554 [bus notice] device status: resetting
2023-01-11 09:39:08.555 [bus notice] re-opened 192.168.2.25:9999
2023-01-11 09:39:08.561 [bus notice] device status: reset
2023-01-11 09:39:08.587 [bus notice] signal acquired
2023-01-11 09:39:08.710 [update error] unable to parse poll-read cc StatOperatingHours from 3123b509030dcd00 / 00: ERR: invalid position
2023-01-11 09:39:10.712 [mqtt error] decode cc StatOperatingHours: ERR: invalid position
2023-01-11 09:39:16.801 [update notice] received scan-read scan.25 QQ=10: Vaillant;VR630;0306;6301
2023-01-11 09:39:17.010 [update notice] received scan-read scan.23 QQ=10: Vaillant;VR630;0306;6301
2023-01-11 09:39:19.262 [bus error] poll cc StatPowerOn failed: ERR: read timeout
2023-01-11 09:39:20.213 [update notice] received unknown MS cmd: 1026b50909323f00446f49744300 / 0101
2023-01-11 09:39:20.426 [update notice] received unknown MS cmd: 1026b50909327f00446f49744300 / 0101
2023-01-11 09:39:27.315 [update notice] received unknown MS cmd: 1026b50909323f01446f49744300 / 0101
2023-01-11 09:39:27.527 [update notice] received unknown MS cmd: 1026b50909327f01446f49744300 / 0101
2023-01-11 09:39:27.739 [update notice] received scan-read scan.44 QQ=10: Vaillant;VR630;0306;6301
2023-01-11 09:39:27.951 [bus notice] new master 7f, master count 4
2023-01-11 09:39:27.951 [bus notice] scan 84: ;Vaillant;VR630;0306;6301
2023-01-11 09:39:27.951 [update notice] store 84 ident: done
2023-01-11 09:39:27.951 [update notice] received scan-read scan.84 QQ=10: Vaillant;VR630;0306;6301
2023-01-11 09:39:30.229 [bus error] poll cc StatRestarts failed: ERR: read timeout
2023-01-11 09:39:31.867 [main error] unable to load scan config 84: no file from vaillant with prefix 84 matches ID "vr630", SW0306, HW6301
2023-01-11 09:39:31.867 [main error] scan config 84: ERR: read timeout
2023-01-11 09:39:36.019 [update notice] received unknown MS cmd: 1026b5040101 / 09190100000285000100
2023-01-11 09:39:36.275 [update notice] received read mc Mode QQ=10: 23;on;0;0;off;mixer;day
2023-01-11 09:39:36.485 [update notice] received poll-read mc.3 Mode QQ=10: 20;auto;0;0;low;inactive;night
2023-01-11 09:39:36.738 [update notice] received read hwc Mode QQ=10: 43;auto;disabled;hwc;00;night
2023-01-11 09:39:36.954 [update notice] received poll-read cc Mode QQ=10: 20;auto;disabled;circulation;00;night
2023-01-11 09:39:37.174 [update notice] received unknown MS cmd: 1044b5070101 / 028200
2023-01-11 09:39:37.396 [update notice] received unknown MS cmd: 1084b5070101 / 028200
2023-01-11 09:39:37.671 [update notice] received unknown MS cmd: 1026b504010d / 052b005a0219
2023-01-11 09:39:37.901 [update notice] received update-read broadcast vdatetime QQ=10: 09:46:03;11.01.2023
2023-01-11 09:39:38.156 [update notice] received unknown MS cmd: 1026b5040109 / 0a191046008512001e3000
2023-01-11 09:39:38.361 [update notice] received update-read broadcast outsidetemp QQ=10: 0.000
2023-01-11 09:39:38.593 [update notice] received update-read broadcast datetime QQ=10: 0.000;09:46:03;11.01.2023
2023-01-11 09:39:38.887 [update notice] received unknown MS cmd: 1026b5090118 / 0a00000000000000000000
2023-01-11 09:39:39.105 [update notice] received unknown MS cmd: 1044b5070104 / 0100
2023-01-11 09:39:41.151 [update error] unable to parse poll-read cc StatRTOSErrorCounter from 3123b509030dd300 / 00: ERR: invalid position
2023-01-11 09:39:41.502 [update notice] received unknown MS cmd: 1026b509030d7c00 / 0100
2023-01-11 09:39:41.918 [update notice] received read hc DateTime QQ=10: nosignal;09:46:06;11.01.2023;6.438
2023-01-11 09:39:42.175 [update notice] received read mc Params QQ=10: 23;15;0.55;mixer;16;0;30;42;0
2023-01-11 09:39:42.391 [update notice] received unknown MS cmd: 1044b5070104 / 0100
2023-01-11 09:39:43.930 [mqtt error] decode cc StatRTOSErrorCounter: ERR: invalid position
2023-01-11 09:39:44.775 [update notice] received unknown MS cmd: 1026b509030d7c00 / 0100
2023-01-11 09:39:45.048 [update notice] received read hc DateTime QQ=10: nosignal;09:46:09;11.01.2023;6.438
2023-01-11 09:39:45.261 [update notice] received unknown MS cmd: 1025b504010b / 0400050000
2023-01-11 09:39:45.641 [update notice] received unknown MS cmd: 1044b5070104 / 0100
2023-01-11 09:39:47.863 [update notice] received unknown MS cmd: 1026b509030d7c00 / 0100
2023-01-11 09:39:48.319 [update notice] received read hc DateTime QQ=10: nosignal;09:46:12;11.01.2023;6.438
2023-01-11 09:39:48.563 [update notice] received read hwc Timer.Wednesday QQ=10: 05:30;08:00;18:00;20:00;-:-;-:-;Mo-Fr
2023-01-11 09:39:48.781 [update notice] received unknown MS cmd: 1044b5070104 / 0100
2023-01-11 09:39:51.564 [update notice] received unknown MS cmd: 1026b509030d7c00 / 0100
2023-01-11 09:39:51.860 [update notice] received read hc DateTime QQ=10: nosignal;09:46:16;11.01.2023;6.438
2023-01-11 09:39:52.078 [update notice] received unknown MS cmd: 1026b505021c00 / 00
2023-01-11 09:39:52.178 [update notice] sent poll-read cc Status0a QQ=31: -;off;off;off;0
2023-01-11 09:39:52.707 [update notice] received unknown BC cmd: 10feb505022a07
2023-01-11 09:39:53.001 [update notice] received unknown MS cmd: 1026b505022800 / 00
2023-01-11 09:39:53.203 [update notice] received unknown BC cmd: 10feb505021500
2023-01-11 09:39:53.682 [update notice] received unknown BC cmd: 10feb50502160c
2023-01-11 09:39:54.043 [update notice] received unknown BC cmd: 10feb505021700
2023-01-11 09:39:54.578 [update notice] received unknown BC cmd: 10feb505022c00
2023-01-11 09:39:55.002 [update notice] received unknown BC cmd: 10feb505021400
2023-01-11 09:39:55.320 [update notice] received poll-read mc Status QQ=10: 37;off;33.94;23
2023-01-11 09:39:55.592 [update notice] received read hc SumFlowSensor QQ=10: 37.31;ok
2023-01-11 09:39:55.784 [update notice] received write mc RoomTempOffset QQ=10: 0.00
2023-01-11 09:39:56.072 [update notice] received update-read broadcast hwcStatus QQ=10: off;37;off
2023-01-11 09:39:56.688 [update notice] received unknown MS cmd: 1025b5040117 / 0100
2023-01-11 09:39:57.021 [update notice] received unknown MS cmd: 1026b5040101 / 09190100000285000100
2023-01-11 09:39:57.262 [update notice] received unknown MS cmd: 1050b505072b000c00000000 / 00
2023-01-11 09:39:57.605 [update notice] received unknown MM cmd: 103f050105aa2b2b0600
2023-01-11 09:39:58.180 [update notice] received unknown MM cmd: 103fb509040e7d0000
2023-01-11 09:39:59.071 [update notice] received poll-read mc.3 Mode QQ=10: 20;auto;0;0;low;inactive;night
2023-01-11 09:39:59.307 [update notice] received poll-read mc.3 Status QQ=10: 0;off;-;0
2023-01-11 09:39:59.542 [update notice] received read hc SumFlowSensor QQ=10: 37.25;ok
2023-01-11 09:39:59.759 [update notice] received unknown MS cmd: 1044b5070104 / 0100
2023-01-11 09:40:02.621 [update notice] received unknown MS cmd: 1026b509030d7c00 / 0100
2023-01-11 09:40:03.031 [update notice] received update-read broadcast hwcStatus QQ=10: off;37;off
2023-01-11 09:40:03.150 [update notice] sent poll-read cc Status16 QQ=31: 6.69
2023-01-11 09:40:03.771 [update notice] received unknown MS cmd: 1025b5040117 / 0100
2023-01-11 09:40:05.055 [update notice] received unknown MS cmd: 1051b505072b000c00000000 / 00
2023-01-11 09:40:07.275 [update notice] received unknown MM cmd: 103f050105aa2b2b0600
2023-01-11 09:40:07.648 [update notice] received unknown MM cmd: 103fb509040e7d0000
2023-01-11 09:40:09.141 [update notice] received read hwc Mode QQ=10: 43;auto;disabled;hwc;00;night
2023-01-11 09:40:09.375 [update notice] received read hwc Status QQ=10: 0;off;-;0
2023-01-11 09:40:09.611 [update notice] received read hc SumFlowSensor QQ=10: 37.00;ok
2023-01-11 09:40:09.866 [update notice] received read hc DateTime QQ=10: nosignal;09:46:34;11.01.2023;6.438
2023-01-11 09:40:13.150 [update notice] received update-read broadcast hwcStatus QQ=10: off;37;off
2023-01-11 09:40:13.606 [update notice] received unknown MS cmd: 1025b5040117 / 0100
2023-01-11 09:40:14.134 [update notice] sent poll-read cc Status QQ=31: 0;off;-;0
2023-01-11 09:40:15.058 [update notice] received unknown MS cmd: 1025b505072b000c00000000 / 00
2023-01-11 09:40:17.037 [update notice] received unknown MM cmd: 103f050105aa2b2b0600
2023-01-11 09:40:17.250 [update notice] received unknown MM cmd: 103fb509040e7d0000

[bofruehw]

Log after eBUSd restart:
2023-01-11 12:51:21.329 [bus debug] notify request: done
2023-01-11 12:51:21.329 [bus notice] scan 23: ;Vaillant;VR630;0306;6301
2023-01-11 12:51:21.330 [bus info] scan 23 cmd: 3123b5090124
2023-01-11 12:51:21.330 [bus debug] switching from send response ACK to send SYN
2023-01-11 12:51:21.338 [bus debug] send/receive symbol latency 7 ms
2023-01-11 12:51:21.338 [bus debug] switching from send SYN to ready
2023-01-11 12:51:21.338 [bus debug] start request 31
2023-01-11 12:51:21.339 [bus debug] arbitration start with 31
2023-01-11 12:51:21.382 [bus debug] arbitration won
2023-01-11 12:51:21.382 [bus debug] arbitration delay 22 micros
2023-01-11 12:51:21.382 [bus debug] switching from ready to send command
2023-01-11 12:51:21.391 [bus debug] send/receive symbol latency 8 ms
2023-01-11 12:51:21.398 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:21.406 [bus debug] send/receive symbol latency 7 ms
2023-01-11 12:51:21.413 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:21.420 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:21.420 [bus debug] switching from send command to send command CRC
2023-01-11 12:51:21.426 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:21.427 [bus debug] switching from send command CRC to receive command ACK
2023-01-11 12:51:21.431 [bus debug] switching from receive command ACK to receive response
2023-01-11 12:51:21.582 [bus debug] notify request: ERR: read timeout
2023-01-11 12:51:21.582 [bus debug] ERR: read timeout during receive response, switching to skip
2023-01-11 12:51:22.446 [main notice] read scan config file vaillant/23.vr630.cc.csv for ID "vr630", SW0306, HW6301
2023-01-11 12:51:22.964 [update notice] received unknown MS cmd: 1026b505042d000000 / 00
2023-01-11 12:51:24.195 [main notice] found messages: 536 (12 conditional on 11 conditions, 105 poll, 10 update)
2023-01-11 12:51:24.195 [main info] scan config 23 message received
2023-01-11 12:51:24.499 [update notice] received read hc DateTime QQ=10: nosignal;12:57:47;11.01.2023;8.375
2023-01-11 12:51:25.147 [update notice] received update-read broadcast hwcStatus QQ=10: off;42;off
2023-01-11 12:51:25.444 [update notice] received unknown MS cmd: 1025b5040117 / 0100
2023-01-11 12:51:27.004 [update notice] received unknown MS cmd: 1026b505072b000c00000000 / 00
2023-01-11 12:51:28.007 [bus info] poll cmd: 3115b509030d4c10
2023-01-11 12:51:28.007 [bus debug] start request 31
2023-01-11 12:51:28.008 [bus debug] arbitration start with 31
2023-01-11 12:51:28.051 [bus debug] arbitration won
2023-01-11 12:51:28.051 [bus debug] arbitration delay 22 micros
2023-01-11 12:51:28.051 [bus debug] switching from ready to send command
2023-01-11 12:51:28.058 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.065 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.072 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.079 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.085 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.092 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.099 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.099 [bus debug] switching from send command to send command CRC
2023-01-11 12:51:28.106 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.106 [bus debug] switching from send command CRC to receive command ACK
2023-01-11 12:51:28.111 [bus debug] switching from receive command ACK to receive response
2023-01-11 12:51:28.135 [bus debug] switching from receive response to receive response CRC
2023-01-11 12:51:28.140 [bus debug] switching from receive response CRC to send response ACK
2023-01-11 12:51:28.149 [bus debug] send/receive symbol latency 8 ms
2023-01-11 12:51:28.150 [update notice] sent poll-read ui BoilerHoursB3 QQ=31: 0
2023-01-11 12:51:28.150 [bus debug] notify request: done
2023-01-11 12:51:28.151 [bus debug] switching from send response ACK to send SYN
2023-01-11 12:51:28.158 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:28.158 [bus debug] switching from send SYN to ready
2023-01-11 12:51:29.540 [update notice] received unknown MM cmd: 103f050105aa3c3c0800
2023-01-11 12:51:29.790 [update notice] received unknown MM cmd: 103fb509040e7d0000
2023-01-11 12:51:30.040 [update notice] received read hwc Mode QQ=10: 43;auto;disabled;hwc;00;night
2023-01-11 12:51:30.954 [update notice] received poll-read mc Status QQ=10: 35;off;36.62;23
2023-01-11 12:51:31.191 [update notice] received read hc SumFlowSensor QQ=10: 42.06;ok
2023-01-11 12:51:33.015 [update notice] received write mc RoomTempOffset QQ=10: 0.00
2023-01-11 12:51:34.679 [update notice] received update-read broadcast vdatetime QQ=10: 12:58:00;11.01.2023
2023-01-11 12:51:35.083 [update notice] received update-read broadcast outsidetemp QQ=10: 8.375
2023-01-11 12:51:35.793 [update notice] received update-read broadcast datetime QQ=10: 8.375;12:58:00;11.01.2023
2023-01-11 12:51:36.328 [update notice] received unknown MS cmd: 1026b5090118 / 0a00000000000000000000
2023-01-11 12:51:36.538 [update notice] received update-read broadcast hwcStatus QQ=10: off;42;off
2023-01-11 12:51:36.978 [update notice] received unknown MS cmd: 1025b5040117 / 0100
2023-01-11 12:51:37.207 [update notice] received unknown MS cmd: 1026b5040101 / 09190100000285000000
2023-01-11 12:51:37.448 [update notice] received unknown MS cmd: 1050b505072b000c00000000 / 00
2023-01-11 12:51:37.822 [update notice] received poll-read mc Mode QQ=10: 23;on;0;0;off;mixer;night
2023-01-11 12:51:38.961 [update notice] received unknown MM cmd: 103f050105aa3c3c0800
2023-01-11 12:51:39.007 [bus info] poll cmd: 3115b509030d4c18
2023-01-11 12:51:39.007 [bus debug] start request 31
2023-01-11 12:51:39.008 [bus debug] arbitration start with 31
2023-01-11 12:51:39.050 [bus debug] arbitration won
2023-01-11 12:51:39.050 [bus debug] arbitration delay 26 micros
2023-01-11 12:51:39.050 [bus debug] switching from ready to send command
2023-01-11 12:51:39.058 [bus debug] send/receive symbol latency 7 ms
2023-01-11 12:51:39.065 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.072 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.079 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.086 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.093 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.107 [bus debug] send/receive symbol latency 13 ms
2023-01-11 12:51:39.107 [bus debug] switching from send command to send command CRC
2023-01-11 12:51:39.114 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.114 [bus debug] switching from send command CRC to receive command ACK
2023-01-11 12:51:39.118 [bus debug] switching from receive command ACK to receive response
2023-01-11 12:51:39.143 [bus debug] switching from receive response to receive response CRC
2023-01-11 12:51:39.147 [bus debug] switching from receive response CRC to send response ACK
2023-01-11 12:51:39.154 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.155 [update notice] sent poll-read ui BoilerHoursB4 QQ=31: 0
2023-01-11 12:51:39.156 [bus debug] notify request: done
2023-01-11 12:51:39.156 [bus debug] switching from send response ACK to send SYN
2023-01-11 12:51:39.163 [bus debug] send/receive symbol latency 6 ms
2023-01-11 12:51:39.163 [bus debug] switching from send SYN to ready
2023-01-11 12:51:39.252 [update notice] received unknown MM cmd: 103fb509040e7d0000
2023-01-11 12:51:41.064 [update notice] received poll-read mc.3 Mode QQ=10: 20;auto;0;0;low;inactive;night
2023-01-11 12:51:41.299 [update notice] received poll-read mc.3 Status QQ=10: 0;off;-;0
2023-01-11 12:51:41.534 [update notice] received read hc SumFlowSensor QQ=10: 41.88;ok

[bofruehw]

Generally, it works. I also connected ecoCompact VSC int 245/2 on the eBUS, and I can see both devices.
But there are still problems with:

• Unknown commands still coming (there is a set of them, even in literature named as unknown, but still with defined purpose https://ebus-wiki.org/lib/exe/fetch.php/ebus/vaillant_ebus_v0.5.0.odt),
• Some parameters are unknown and undefined,
• Some parameters are different on both devices and on Home Assistant (!!!???) and
• For some parameters need a lot of time to update (!!!???) .
  Are there any suggestions?
  How can I renew all parameters?
  Can I request updates more frequently?
  btw. The hardware is I think ok. On an oscilloscope signals are ok, and the network is stable. BTW it is a simple signal converter with esp-01s, without any additional purpose, and with 5V aux power completely isolated from the bus.
  THX
  BR