UNT403A写入EMMC选306可以正常使用 #970

ghost · 2023-01-23T23:58:04Z

Standard chat template, no routine, no chat.
标准聊天模板，无套路不聊天。

Device Information | 设备信息

SOC: [e.g. UNT403A]
Model [e.g. HK1]

Armbian Version | 系统版本

Kernel Version: [e.g. 5.15.100]
Release: [e.g. jammy]

Describe the bug | 问题描述
Describe the problem in detail and attach screenshots if necessary.
详细描述问题，并在必要时附上屏幕截图。

ophub · 2023-01-24T01:26:42Z

u盘中的/boot/uEnv.txt文件照着306的dtb文件名改成401a那个，重启后再使用306写入emmc看看。

反馈一下改成401a后U盘能否正常使用，写入emmc能否正常使用。

ghost · 2023-01-24T01:48:48Z

写入Armbian_23.02.0_amlogic_s905l3a_bullseye_5.15.88_server_2023.01.18.img.gz不改dtb可以直接开机，我改一下试试

ophub · 2023-01-24T01:55:30Z

默认是304的配置，如果可以直接开机，有线网卡也能正常识别，内存大小也对，就armbian-install选择304写入试试也可以。这个盒子之前没用户反馈他的安装选项，你是第一个确认者，根据你的测试结果，我添加到选项里。

ghost · 2023-01-24T02:10:55Z

ghost · 2023-01-24T02:12:03Z

写入EMMC正常负载正常可以开机！

ghost · 2023-01-24T02:12:44Z

ophub · 2023-01-24T02:18:08Z

以你的测试结果为准，UNT403A就定为304吧，我随后把它添加到列表里。
方便拍一下你的盒子的外观、盒子底部的型号、主板正面、反面的照片吗？
尽量高清一点，可以看清楚型号代码。

你的这个盒子默认的安卓系统是9.0以上的系统吗？
你有没有这个盒子的原厂安卓系统固件（或者可以通刷的其他盒子或其他版本的安卓固件），发个链接，我转存到 https://github.com/ophub/kernel/releases/tag/tools
方便有还原系统/救砖等需求时使用。

ghost · 2023-01-24T02:21:07Z

是的是安卓9.0

ophub · 2023-01-24T02:21:11Z

打不开，阿里云不支持分享压缩包。
你有百度网盘没？
或者你到你github仓库，任意一个项目，到releases里创建一个tag就可以上传文件，单个文件不大于2G都可以直接手动上传上来。我上面kernel里的那个tag就是每次手动上传添加的。

ghost · 2023-01-24T02:26:49Z

https://github.com/OPMonday/kernel/releases/tag/data

ghost · 2023-01-24T02:32:49Z

https://zndsimg.dangbei.net/data/attachment/forum/202203/27/144426odo4c1ssosohrhbd.jpg

ophub · 2023-01-24T02:47:22Z

谢谢分享，有主板的照片没？

ghost · 2023-01-24T02:48:53Z

有

ophub · 2023-01-24T02:51:53Z

https://blog.csdn.net/wjf149575296/article/details/123947681

网上有文章介绍，目前发现UNT413A有两款芯片，S905L3A和S905L3，区分方法：初步判断是看设备型号，设置关于里面，结尾gd2是L3 ，gd是L3A，强烈建议拆机确认。

除了上面文章介绍的在安卓系统里查看的方法，在SOC上是不是有准确的型号标注呢？

你这个是S905L3A吧？

ghost · 2023-01-24T02:53:18Z

是的

ophub · 2023-01-24T02:53:59Z

主板正面的照片，白条旁边的那个芯片，上面的代码拍的能看见点，看看是哪个

ghost · 2023-01-24T02:55:34Z

8761BTV蓝牙芯片

ophub · 2023-01-24T02:56:34Z

好的

rxy0924 · 2023-01-24T19:01:51Z

重刷安卓9固件后，选304依然不能写入emmc，还是报错

ghost · 2023-01-25T01:34:44Z

你可以试试305
ext4我经过测试305也可以

ghost · 2023-01-25T01:36:44Z

我发现304，在盒子首次刷时的确有些问题（304好像只有在刷过其他(我以前是centos7.9)的系统才可以），用305，ext4是可以直接写入EMMC的
@ophub

ophub · 2023-01-25T01:43:30Z

以安卓系统测试为准。
你刷回上面你分享的安卓系统，再测试305写入的结果。

ghost · 2023-01-25T02:23:20Z

这3个DTB都可以用u盘启动，但在首次写入EMMC时只有305可以(306未测)
在设完密码后会跳一次IP，不知道是为什么

305首次写入未报错


写入后正常开机
MAC正常

负载内存正常

ophub · 2023-01-25T02:27:06Z

你试一下6.1内核用305是否正常，这个多了一个/boot/u-boot文件

如果6.1能在U盘正常启动，有ip再写入。如果有问题就别写入。

ghost · 2023-01-25T02:30:25Z

可以，我以前试过，但6.1用有些东西总报错不过其他都正常
这个盒子刷不死

lzzjw12345 · 2023-07-27T01:11:50Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

WoSeeZoom · 2023-10-14T05:08:09Z

emmc写入错误的解决办法看文档，调频

调过频了，还是失败

请问最后是怎么解决的呢？我的盒子和你的一样，在写入emmc时也一样出现你描述的问题。

lzzjw12345 · 2023-10-14T05:08:33Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

lzan13 · 2023-10-16T03:24:34Z

我这边 UNT403A 刷入上边的android底包，遇到将armbian写入U盘后怎么都无法从U盘启动的问题，最终看到B站郑羊羊的解释，说是要清空盒子系统下/dev/block/env 配置才行，有同类问题的可以试下
https://www.bilibili.com/video/BV1LG411L7Us/?vd_source=d3e1dd0dc316038662523b1bd40e19e7

litingquy19 · 2023-10-31T09:59:44Z

看文档

请问调频文档在那里能找到？

lzzjw12345 · 2023-10-31T10:00:07Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

ophub · 2023-10-31T11:01:11Z

https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/documents/README.cn.md

cdksober · 2023-12-21T08:52:38Z

有UNT403G的GK6323芯片可以用的固件吗？

lzzjw12345 · 2023-12-21T08:53:01Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

liuxiaokai886 · 2023-12-22T01:31:40Z

您好，UNT413A刷了armbian，但是不知道买哪种网卡可以免驱使用

wangzhongwen · 2023-12-26T03:55:28Z

emmc写入错误的解决办法看文档，调频

调过频了，还是失败

请问最后是怎么解决的呢？我的盒子和你的一样，在写入emmc时也一样出现你描述的问题。

无解，后面没折腾了，刷了google tv当电视机顶盒用

dodoy6830 · 2024-01-04T01:27:09Z

UNT403A刷各种版本armbian后出现这个错误。304 305 306都试过，请教各位大神。谢谢。
是不是和nand有关？

403a

ophub · 2024-01-04T03:44:33Z

看文档，降低dtb的频率使用

dodoy6830 · 2024-01-06T10:48:40Z

已改dtb文件，降频，还是不行。

cd /boot/dtb/amlogic/
dtc -I dtb -O dts -o meson-g12a-s905l3a-e900v22c.dts meson-g12a-s905l3a-e900v22c.dtb
搜索max-frequency找到mmc开头的把默认值改为0x5f5e100
3.编译命令（使用 dts 编译生成 dtb 文件）
dtc -I dts -O dtb -o meson-g12a-s905l3a-e900v22c.dtb meson-g12a-s905l3a-e900v22c.dts

dodoy6830 · 2024-01-06T13:32:47Z

请教各位大神，感谢感谢。编译这样是否正常

tqwxo97 · 2024-02-11T17:06:45Z

unt403a蓝牙怎么调出来蓝牙驱动安装了也没用提示没有可用的默认控制器桌面端蓝牙开关白色不能打开

lzzjw12345 · 2024-02-11T17:07:08Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

cdoesa · 2024-02-18T14:37:42Z

UNT403A刷各种版本armbian后出现这个错误。304 305 306都试过，请教各位大神。谢谢。是不是和nand有关？

403a

我也是这样，你安装好了吗

bo138088 · 2024-04-01T22:31:32Z

UNT403A刷各种版本armbian后出现这个错误。304 305 306都试过，请教各位大神。谢谢。是不是和nand有关？
403a

我也是这样，你安装好了吗

没有，后来刷了别的系统，你搞好没？你QQ多少？

lzzjw12345 · 2024-04-01T22:32:05Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

cntv-chat · 2024-04-25T04:00:19Z

The systemd package cannot be installed because this system does
not have a merged /usr.
Please install the usrmerge package to convert this system to merged-/usr.
For more information please read https://wiki.debian.org/UsrMerge.

dpkg: error processing archive /var/cache/apt/archives/systemd_255.4-1ubuntu8_arm64.deb (--unpack):
new systemd package pre-installation script subprocess returned error exit status 1
dpkg: considering deconfiguration of systemd, which would be broken by installation of udev ...
dpkg: yes, will deconfigure systemd (broken by udev)
Preparing to unpack .../udev_255.4-1ubuntu8_arm64.deb ...
De-configuring systemd (255.4-1ubuntu7), to allow installation of udev (255.4-1ubuntu8) ...

The udev package cannot be installed because this system does
not have a merged /usr.
Please install the usrmerge package to convert this system to merged-/usr.
For more information please read https://wiki.debian.org/UsrMerge.

dpkg: error processing archive /var/cache/apt/archives/udev_255.4-1ubuntu8_arm64.deb (--unpack):
new udev package pre-installation script subprocess returned error exit status 1
Preparing to unpack .../libsystemd-shared_255.4-1ubuntu8_arm64.deb ...
Unpacking libsystemd-shared:arm64 (255.4-1ubuntu8) over (255.4-1ubuntu7) ...
Preparing to unpack .../libudev1_255.4-1ubuntu8_arm64.deb ...
Unpacking libudev1:arm64 (255.4-1ubuntu8) over (255.4-1ubuntu7) ...
Errors were encountered while processing:
/var/cache/apt/archives/systemd_255.4-1ubuntu8_arm64.deb
/var/cache/apt/archives/udev_255.4-1ubuntu8_arm64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

apt upgrade 最后给抛出这个错误，这怎么破？

lzzjw12345 · 2024-04-25T04:00:49Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

cntv-chat · 2024-04-25T09:32:24Z

The systemd package cannot be installed because this system does

not have a merged /usr.

Please install the usrmerge package to convert this system to merged-/usr.

For more information please read https://wiki.debian.org/UsrMerge.

dpkg: error processing archive /var/cache/apt/archives/systemd_255.4-1ubuntu8_arm64.deb (--unpack): new systemd package pre-installation script subprocess returned error exit status 1 dpkg: considering deconfiguration of systemd, which would be broken by installation of udev ... dpkg: yes, will deconfigure systemd (broken by udev) Preparing to unpack .../udev_255.4-1ubuntu8_arm64.deb ... De-configuring systemd (255.4-1ubuntu7), to allow installation of udev (255.4-1ubuntu8) ...

The udev package cannot be installed because this system does

not have a merged /usr.

Please install the usrmerge package to convert this system to merged-/usr.

For more information please read https://wiki.debian.org/UsrMerge.

dpkg: error processing archive /var/cache/apt/archives/udev_255.4-1ubuntu8_arm64.deb (--unpack): new udev package pre-installation script subprocess returned error exit status 1 Preparing to unpack .../libsystemd-shared_255.4-1ubuntu8_arm64.deb ... Unpacking libsystemd-shared:arm64 (255.4-1ubuntu8) over (255.4-1ubuntu7) ... Preparing to unpack .../libudev1_255.4-1ubuntu8_arm64.deb ... Unpacking libudev1:arm64 (255.4-1ubuntu8) over (255.4-1ubuntu7) ... Errors were encountered while processing: /var/cache/apt/archives/systemd_255.4-1ubuntu8_arm64.deb /var/cache/apt/archives/udev_255.4-1ubuntu8_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

apt upgrade 最后给抛出这个错误，这怎么破？

后来换了Armbian_24.5.0_amlogic_s905l3a_jammy，好使了。看来Armbian_24.5.0_amlogic_s905l3a_noble对unt403a不太友好。

tchain11 · 2024-06-06T01:54:52Z

请教大神，为啥unt403a（2+8g版）刷入armbian的时候提示硬盘分区无法删除呢？u盘启动是一切正常的。。。

[ OPTIONS ] Please Input ID: 306
[ INFO ] Input Box ID: [ 306 ]
[ INFO ] Model Name: [ M401A,UNT403A,B863AV3.2-M ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-m401a.dtb ]
[ INFO ] MAINLINE_UBOOT: [ ]
[ INFO ] BOOTLOADER_IMG: [ ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] NEED_OVERLOAD: [ no ]
[ STEPS ] Which type of filesystem do you want for your root?

ID TYPE

1 ext4
2 btrfs

[ OPTIONS ] Please Input ID (1/2): 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] Type of filesystem: [ ext4 ]
[ STEPS ] Partitioning eMMC...
[ INFO ] Start backing up the default bootloader.
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.316407 s, 13.3 MB/s
[ INFO ] Delete the existing [ 2 ] partitions.
Error: Input/output error during write on /dev/mmcblk2
[ ERROR ] Failed to delete partition [ 1 ]. Please try again.

lzzjw12345 · 2024-06-06T01:55:27Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

kuleko · 2024-08-04T07:16:54Z

EMMC刷入openwrt，k6.1.xxx没有问题，k6.6.xx提示“/mnt/mmcblk2p4 Cannot be uninstalled, the installation process is aborted.”关闭docker自启动可以解决，但是开机停在第一屏。

lzzjw12345 · 2024-08-04T07:17:25Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

yuanping7559 · 2024-10-20T00:21:06Z

以你的测试结果为准，UNT403A就定为304吧，我随后把它添加到列表里。方便拍一下你的盒子的外观、盒子底部的型号、主板正面、反面的照片吗？尽量高清一点，可以看清楚型号代码。

你的这个盒子默认的安卓系统是9.0以上的系统吗？你有没有这个盒子的原厂安卓系统固件（或者可以通刷的其他盒子或其他版本的安卓固件），发个链接，我转存到 https://github.com/ophub/kernel/releases/tag/tools 方便有还原系统/救砖等需求时使用。

九联UNT413A刷入emmc可以用选306 内核不支持CAN，Welcome to Armbian OS 24.11.0 Jammy with Linux 6.6.48-ophub

System load: 11% Up time: 0 min
Memory usage: 8% of 1.89G IP: 192.168.50.112
CPU temp: 44°C Usage of /: 2% of 114G
storage/: 32% of 510M
RX today: 11.2 KiB

[ General system configuration (beta): armbian-config ]

Last login: Sun Sep 1 13:50:10 2024
root@armbian:# sudo modprobe can && echo "您的内核支持 CAN" || echo "您的内核不支持 CAN"
modprobe: FATAL: Module can not found in directory /lib/modules/6.6.48-ophub
您的内核不支持 CAN
root@armbian:#

/

lzzjw12345 · 2024-10-20T00:21:39Z

这是来自QQ邮箱的假期自动回复邮件。您好，我最近正在休假中，无法亲自回复您的邮件。我将在假期结束后，尽快给您回复。

yuanping7559 · 2024-10-20T00:52:42Z

九联UNT413A 2+8G S905L3A 选306刷好armbian 内核不支持CAN
Welcome to Armbian OS 24.11.0 Jammy with Linux 6.6.48-ophub

System load: 11% Up time: 0 min
Memory usage: 8% of 1.89G IP: 192.168.50.112
CPU temp: 44°C Usage of /: 2% of 114G
storage/: 32% of 510M
RX today: 11.2 KiB

[ General system configuration (beta): armbian-config ]

Last login: Sun Sep 1 13:50:10 2024
root@armbian:# sudo modprobe can && echo "您的内核支持 CAN" || echo "您的内核不支持 CAN"
modprobe: FATAL: Module can not found in directory /lib/modules/6.6.48-ophub
您的内核不支持 CAN
root@armbian:#

ophub changed the title ~~UNT403A写入EMMC选哪个？没有UNT403A的选项~~ UNT403A写入EMMC选304可以正常使用 Jan 24, 2023

ophub added documentation Improvements or additions to documentation support This need is supported new box Research Fills in the Blanks labels Jan 24, 2023

ophub closed this as completed Jan 24, 2023

UNT403A写入EMMC选306可以正常使用 #970

UNT403A写入EMMC选306可以正常使用 #970

Comments

ghost commented Jan 23, 2023

ophub commented Jan 24, 2023

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023 • edited Loading

ghost commented Jan 24, 2023

ghost commented Jan 24, 2023

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023 • edited Loading

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023 • edited Loading

ghost commented Jan 24, 2023

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023 • edited Loading

ghost commented Jan 24, 2023

ophub commented Jan 24, 2023 • edited Loading

ghost commented Jan 24, 2023 • edited by ghost Loading

ophub commented Jan 24, 2023

rxy0924 commented Jan 24, 2023

ghost commented Jan 25, 2023

ghost commented Jan 25, 2023 • edited by ghost Loading

ophub commented Jan 25, 2023

ghost commented Jan 25, 2023 • edited by ghost Loading

ophub commented Jan 25, 2023 • edited Loading

ghost commented Jan 25, 2023

lzzjw12345 commented Jul 27, 2023 via email

WoSeeZoom commented Oct 14, 2023

lzzjw12345 commented Oct 14, 2023 via email

lzan13 commented Oct 16, 2023

litingquy19 commented Oct 31, 2023

lzzjw12345 commented Oct 31, 2023 via email

ophub commented Oct 31, 2023

cdksober commented Dec 21, 2023

lzzjw12345 commented Dec 21, 2023 via email

liuxiaokai886 commented Dec 22, 2023

wangzhongwen commented Dec 26, 2023

dodoy6830 commented Jan 4, 2024

ophub commented Jan 4, 2024

dodoy6830 commented Jan 6, 2024

dodoy6830 commented Jan 6, 2024

tqwxo97 commented Feb 11, 2024

lzzjw12345 commented Feb 11, 2024 via email

cdoesa commented Feb 18, 2024

bo138088 commented Apr 1, 2024

lzzjw12345 commented Apr 1, 2024 via email

cntv-chat commented Apr 25, 2024

lzzjw12345 commented Apr 25, 2024 via email

cntv-chat commented Apr 25, 2024

tchain11 commented Jun 6, 2024

ID TYPE

1 ext4 2 btrfs

lzzjw12345 commented Jun 6, 2024 via email

kuleko commented Aug 4, 2024

lzzjw12345 commented Aug 4, 2024 via email

yuanping7559 commented Oct 20, 2024 • edited Loading

lzzjw12345 commented Oct 20, 2024 via email

yuanping7559 commented Oct 20, 2024 • edited Loading

ophub commented Jan 24, 2023 •

edited

Loading

ophub commented Jan 24, 2023 •

edited

Loading

ophub commented Jan 24, 2023 •

edited

Loading

ophub commented Jan 24, 2023 •

edited

Loading

ophub commented Jan 24, 2023 •

edited

Loading

ghost commented Jan 24, 2023 •

edited by ghost

Loading

ghost commented Jan 25, 2023 •

edited by ghost

Loading

ghost commented Jan 25, 2023 •

edited by ghost

Loading

ophub commented Jan 25, 2023 •

edited

Loading

1 ext4
2 btrfs

yuanping7559 commented Oct 20, 2024 •

edited

Loading

yuanping7559 commented Oct 20, 2024 •

edited

Loading