[S5B] 2A03's Pulse0 channel does not work properly when exporting an NSF with the S5B chip expansion.

[Julllliot]

I tried to export my S5B song to NSF and listen to it in NSFPlay 2.6, but the pitch of the 2A03 pulse0 got stuck in A-1, the lowest frequency possible.

Here's an example. I tested in a fresh .dnm file with the pulse0 and 5b square1 playing together the exact line, but the pulse0 does not respond. Why?

Then I tried to convert it in another version of famitracker: the beta 0.5 and Hertzdevil 0CC one. These two work properly when exporting to NSF, except for Dn.

Here's a ZIP file with the test that I did:
BUG test.zip

[Kuhneghetz]

I experience a similar issue with the Square 0 (aka Pulse 1) as Julllliot, except exporting a project with MMC5 and VRC7 chips included.
This seems to only affect the lastest version of Dn-FamiTracker 0.5.0.1. I tested the previous version 0.5.0.0, and that one exported the project properly.

[Gumball2415]

https://github.com/Dn-Programming-Core-Management/Dn-FamiTracker/actions/runs/8067304836
can you confirm if this build fixes the issue?

[Kuhneghetz]

https://github.com/Dn-Programming-Core-Management/Dn-FamiTracker/actions/runs/8067304836 can you confirm if this build fixes the issue?

Tried with the new build 0.5.0.2. I still have issues with the first Pulse being stuck at A-1 on exported NSFs with expansion chips.
With an odd exception of one experimental project where I tested S5B's envelope. While first Pulse played fine there in the export, the envelope did not play at all.

Attaching here both a test file with the first Pulse issue, plus the test file with the S5B envelope.
Desktop.zip

Until this issue has been solved, I'll be sticking to 0.5.0.0 for now as that version doesn't have this problem.

[Gumball2415]

not the 0.5.0.3 beta build artifact as i linked above?

[Kuhneghetz]

not the 0.5.0.3 beta build artifact as i linked above?

Wasn't aware of a beta build. Tested it now, and the A-1 issue has fortunately been solved.
However, the S5B envelope effect still doesn't play when exported.
s5b_envelope_test.zip

[Gumball2415]

i will file this under a new issue

[Gumball2415]

Until this issue has been solved, I'll be sticking to 0.5.0.0 for now as that version doesn't have this problem.

do not use 0.5.0.0, it is known to erroneously write corrupted pattern data (effects conversion)