IOS 2.16.30 Beta

[bco116]

Hello! I recently downloaded QZ to interface my Nordictrack 1750 treadmill with Zwift, and it works great. Now I am reading where automatic inclination adjustment is now possible using QZ 2.16.30 - is it possible to receive a TestFlight code for this version?

[cagnulein]

hi! are you able to change inclination from the qz app directly? that's the first requirement for auto inclination let me know Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 20:21 bco116 ***@***.***> ha scritto:

…

Hello! I recently downloaded QZ to interface my Nordictrack 1750 treadmill with Zwift, and it works great. Now I am reading where automatic inclination adjustment is now possible using QZ 2.16.30 - is it possible to receive a TestFlight code for this version? — Reply to this email directly, view it on GitHub <#2000>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWBPWDP657OI54GBG7LYOQV2RAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZWGA3TIMRUHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[bco116]

Hello, yes I am. I needed to play with the offset; sometimes when I pressed +, the incline would keep going down. Once I adjusted this setting through some trial and error, + and - appear to be working correctly. Thanks for your help, the potential of this app is amazing!

[cagnulein]

Glad to hear it! which offset are you referring? anyway send me an email to roberto.viola83 at gmail.com and I will send you the beta mention this ticket in the email Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha scritto:

…

Hello, yes I am. I needed to play with the offset; sometimes when I pressed +, the incline would keep going down. Once I adjusted this setting through some trial and error, + and - appear to be working correctly. Thanks for your help, the potential of this app is amazing! — Reply to this email directly, view it on GitHub <#2000 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> . You are receiving this because you commented.Message ID: ***@***.*** com>

[bco116]

The offset is “inclination override offset”, under treadmill inclination overrides.  Maybe I did not need to adjust this, but it seemed to help. Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> wrote: Glad to hear it! which offset are you referring? anyway send me an email to roberto.viola83 at gmail.com and I will send you the beta mention this ticket in the email Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha scritto:

Hello, yes I am. I needed to play with the offset; sometimes when I pressed +, the incline would keep going down. Once I adjusted this setting through some trial and error, + and - appear to be working correctly. Thanks for your help, the potential of this app is amazing! — Reply to this email directly, view it on GitHub <#2000 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> . You are receiving this because you commented.Message ID: ***@***.*** com>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

hah ok so it means that the coordinates are slightly different from the implementation Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha scritto:

…

The offset is “inclination override offset”, under treadmill inclination overrides. Maybe I did not need to adjust this, but it seemed to help. Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> wrote: Glad to hear it! which offset are you referring? anyway send me an email to roberto.viola83 at gmail.com and I will send you the beta mention this ticket in the email Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha scritto: > Hello, yes I am. I needed to play with the offset; sometimes when I > pressed +, the incline would keep going down. Once I adjusted this setting > through some trial and error, + and - appear to be working correctly. > Thanks for your help, the potential of this app is amazing! > > — > Reply to this email directly, view it on GitHub > < #2000 (reply in thread)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> . You are receiving this because you commented.Message ID: ***@***.*** com>

[bco116]

Yep, that’s what I figured.  I am running the old version of iFit Cardio that came with my treadmill, because if I let it do the software update, it would no longer communicate with QZ.Sent from my iPadOn Jan 14, 2024, at 4:01 PM, Roberto Viola ***@***.***> wrote: hah ok so it means that the coordinates are slightly different from the implementation Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha scritto:

The offset is “inclination override offset”, under treadmill inclination overrides. Maybe I did not need to adjust this, but it seemed to help. Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> wrote: Glad to hear it! which offset are you referring? anyway send me an email to roberto.viola83 at gmail.com and I will send you the beta mention this ticket in the email Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha scritto: > Hello, yes I am. I needed to play with the offset; sometimes when I > pressed +, the incline would keep going down. Once I adjusted this setting > through some trial and error, + and - appear to be working correctly. > Thanks for your help, the potential of this app is amazing! > > — > Reply to this email directly, view it on GitHub > < #2000 (reply in thread)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> . You are receiving this because you commented.Message ID: ***@***.*** com>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

ok in case I can add coordinate for this try the beta first :) Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:05 bco116 ***@***.***> ha scritto:

…

Yep, that’s what I figured. I am running the old version of iFit Cardio that came with my treadmill, because if I let it do the software update, it would no longer communicate with QZ.Sent from my iPadOn Jan 14, 2024, at 4:01 PM, Roberto Viola ***@***.***> wrote: hah ok so it means that the coordinates are slightly different from the implementation Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha scritto: > The offset is “inclination override offset”, under treadmill inclination > overrides. Maybe I did not need to adjust this, but it seemed to help. > Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> > wrote: > Glad to hear it! > > which offset are you referring? > > anyway send me an email to roberto.viola83 at gmail.com and I will send > you > > the beta > > mention this ticket in the email > > > > > > Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha > > scritto: > > > > > Hello, yes I am. I needed to play with the offset; sometimes when I > > > pressed +, the incline would keep going down. Once I adjusted this > setting > > > through some trial and error, + and - appear to be working correctly. > > > Thanks for your help, the potential of this app is amazing! > > > > > > — > > > Reply to this email directly, view it on GitHub > > > < > #2000 (reply in thread)>, > > > > or unsubscribe > > > < > https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > > > > . > > > You are receiving this because you commented.Message ID: > > > ***@***.*** > > > com> > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > receiving this because you are subscribed to this thread.Message ID: > ***@***.***> > > — > Reply to this email directly, view it on GitHub > < #2000 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWF4NPUI6DFMO3GC4STYORCAZAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE4DM> . You are receiving this because you commented.Message ID: ***@***.*** com>

[bco116]

The beta works! I chose a hilly route in Zwift, and inclination adjusted automatically as I moved through the route. It appeared to follow more closely on the negative side than on the positive.  For example, if Zwift incline was 5%, the treadmill would be at 2.5 or 3.  On the downhills, it was usually just about spot on.  With auto inclination, is QZ able to directly set the treadmill inclination value, or is it “touching” the sliders like it does for manual +/- adjustments?  Just wondering if I need to adjust my offsets some more.  Thanks again for your help!On Jan 14, 2024, at 4:18 PM, Roberto Viola ***@***.***> wrote: ok in case I can add coordinate for this try the beta first :) Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:05 bco116 ***@***.***> ha scritto:

Yep, that’s what I figured. I am running the old version of iFit Cardio that came with my treadmill, because if I let it do the software update, it would no longer communicate with QZ.Sent from my iPadOn Jan 14, 2024, at 4:01 PM, Roberto Viola ***@***.***> wrote: hah ok so it means that the coordinates are slightly different from the implementation Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha scritto: > The offset is “inclination override offset”, under treadmill inclination > overrides. Maybe I did not need to adjust this, but it seemed to help. > Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> > wrote: > Glad to hear it! > > which offset are you referring? > > anyway send me an email to roberto.viola83 at gmail.com and I will send > you > > the beta > > mention this ticket in the email > > > > > > Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha > > scritto: > > > > > Hello, yes I am. I needed to play with the offset; sometimes when I > > > pressed +, the incline would keep going down. Once I adjusted this > setting > > > through some trial and error, + and - appear to be working correctly. > > > Thanks for your help, the potential of this app is amazing! > > > > > > — > > > Reply to this email directly, view it on GitHub > > > < > #2000 (reply in thread)>, > > > > or unsubscribe > > > < > https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > > > > . > > > You are receiving this because you commented.Message ID: > > > ***@***.*** > > > com> > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > receiving this because you are subscribed to this thread.Message ID: > ***@***.***> > > — > Reply to this email directly, view it on GitHub > < #2000 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWF4NPUI6DFMO3GC4STYORCAZAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE4DM> . You are receiving this because you commented.Message ID: ***@***.*** com>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

that's great! qz is controlling always the inclination using the virtual touch events, so you can use the inclination offset setting to fix it or we can try to handle the coordinates of your ifit app the first should be easier for you since you can do by yourself :) let me know Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:34 bco116 ***@***.***> ha scritto:

…

The beta works! I chose a hilly route in Zwift, and inclination adjusted automatically as I moved through the route. It appeared to follow more closely on the negative side than on the positive. For example, if Zwift incline was 5%, the treadmill would be at 2.5 or 3. On the downhills, it was usually just about spot on. With auto inclination, is QZ able to directly set the treadmill inclination value, or is it “touching” the sliders like it does for manual +/- adjustments? Just wondering if I need to adjust my offsets some more. Thanks again for your help!On Jan 14, 2024, at 4:18 PM, Roberto Viola ***@***.***> wrote: ok in case I can add coordinate for this try the beta first :) Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:05 bco116 ***@***.***> ha scritto: > Yep, that’s what I figured. I am running the old version of iFit Cardio > that came with my treadmill, because if I let it do the software update, it > would no longer communicate with QZ.Sent from my iPadOn Jan 14, 2024, at > 4:01 PM, Roberto Viola ***@***.***> wrote: > hah ok so it means that the coordinates are slightly different from the > > implementation > > > > Roberto Viola > > Software engineer and open source enthusiast > > http://robertoviola.cloud > > > > > > > > Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha > > scritto: > > > > > The offset is “inclination override offset”, under treadmill inclination > > > overrides. Maybe I did not need to adjust this, but it seemed to help. > > > Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> > > > wrote: > > > Glad to hear it! > > > > > > which offset are you referring? > > > > > > anyway send me an email to roberto.viola83 at gmail.com and I will send > > > you > > > > > > the beta > > > > > > mention this ticket in the email > > > > > > > > > > > > > > > > > > Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha > > > > > > scritto: > > > > > > > > > > > > > Hello, yes I am. I needed to play with the offset; sometimes when I > > > > > > > pressed +, the incline would keep going down. Once I adjusted this > > > setting > > > > > > > through some trial and error, + and - appear to be working correctly. > > > > > > > Thanks for your help, the potential of this app is amazing! > > > > > > > > > > > > > > — > > > > > > > Reply to this email directly, view it on GitHub > > > > > > > < > > > > #2000 (reply in thread)>, > > > > > > > > > > > or unsubscribe > > > > > > > < > > > > https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > > > > > > > > > > > . > > > > > > > You are receiving this because you commented.Message ID: > > > > > > > ***@***.*** > > > > > > > com> > > > > > > > > > > > > > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > > > receiving this because you are subscribed to this thread.Message ID: > > > ***@***.***> > > > > > > — > > > Reply to this email directly, view it on GitHub > > > < > #2000 (comment)>, > > > > or unsubscribe > > > < > https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> > > > > . > > > You are receiving this because you commented.Message ID: > > > ***@***.*** > > > com> > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > receiving this because you are subscribed to this thread.Message ID: > ***@***.***> > > — > Reply to this email directly, view it on GitHub > < #2000 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWF4NPUI6DFMO3GC4STYORCAZAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE4DM> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWFTLLXZPV6AMS2AP7LYORFPDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGI4TM> . You are receiving this because you commented.Message ID: ***@***.*** com>

[bco116]

Hi Roberto - I’m wondering if you might be able to assist with the inclination offset settings. I played around with them yesterday on QZ 2.16.30, but I could only make the manual inclination adjustment work in the negative direction, no matter what value I selected for the offset. However, when using with Zwift, it appeared to automatically adjust in both the positive and negative directions. Unfortunately, I inadvertently picked a mostly downhill route, so it wasn’t a good test - I’ll try again tonight on a more varied course.I have 2 questions related to the inclination offset:1) what is the unit of measurement of the value being set? Is it pixels? Percent incline?2) when I adjust the offset, do I also need to set the individual override for each half percent? For example, if I set the offset to 5, do I need to override 0% to 5, 0.5% to 5.5, and so on?Thanks for your help!On Jan 14, 2024, at 4:37 PM, Roberto Viola ***@***.***> wrote: that's great! qz is controlling always the inclination using the virtual touch events, so you can use the inclination offset setting to fix it or we can try to handle the coordinates of your ifit app the first should be easier for you since you can do by yourself :) let me know Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:34 bco116 ***@***.***> ha scritto:

The beta works! I chose a hilly route in Zwift, and inclination adjusted automatically as I moved through the route. It appeared to follow more closely on the negative side than on the positive. For example, if Zwift incline was 5%, the treadmill would be at 2.5 or 3. On the downhills, it was usually just about spot on. With auto inclination, is QZ able to directly set the treadmill inclination value, or is it “touching” the sliders like it does for manual +/- adjustments? Just wondering if I need to adjust my offsets some more. Thanks again for your help!On Jan 14, 2024, at 4:18 PM, Roberto Viola ***@***.***> wrote: ok in case I can add coordinate for this try the beta first :) Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 14 gen 2024 alle 22:05 bco116 ***@***.***> ha scritto: > Yep, that’s what I figured. I am running the old version of iFit Cardio > that came with my treadmill, because if I let it do the software update, it > would no longer communicate with QZ.Sent from my iPadOn Jan 14, 2024, at > 4:01 PM, Roberto Viola ***@***.***> wrote: > hah ok so it means that the coordinates are slightly different from the > > implementation > > > > Roberto Viola > > Software engineer and open source enthusiast > > http://robertoviola.cloud > > > > > > > > Il giorno dom 14 gen 2024 alle 21:58 bco116 ***@***.***> ha > > scritto: > > > > > The offset is “inclination override offset”, under treadmill inclination > > > overrides. Maybe I did not need to adjust this, but it seemed to help. > > > Email coming!On Jan 14, 2024, at 3:45 PM, Roberto Viola ***@***.***> > > > wrote: > > > Glad to hear it! > > > > > > which offset are you referring? > > > > > > anyway send me an email to roberto.viola83 at gmail.com and I will send > > > you > > > > > > the beta > > > > > > mention this ticket in the email > > > > > > > > > > > > > > > > > > Il giorno dom 14 gen 2024 alle 21:42 bco116 ***@***.***> ha > > > > > > scritto: > > > > > > > > > > > > > Hello, yes I am. I needed to play with the offset; sometimes when I > > > > > > > pressed +, the incline would keep going down. Once I adjusted this > > > setting > > > > > > > through some trial and error, + and - appear to be working correctly. > > > > > > > Thanks for your help, the potential of this app is amazing! > > > > > > > > > > > > > > — > > > > > > > Reply to this email directly, view it on GitHub > > > > > > > < > > > > #2000 (reply in thread)>, > > > > > > > > > > > or unsubscribe > > > > > > > < > > > > https://github.com/notifications/unsubscribe-auth/AAALYWACFN7CSBPWGMAFM53YOQ7LDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGA4TO> > > > > > > > > > > > . > > > > > > > You are receiving this because you commented.Message ID: > > > > > > > ***@***.*** > > > > > > > com> > > > > > > > > > > > > > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > > > receiving this because you are subscribed to this thread.Message ID: > > > ***@***.***> > > > > > > — > > > Reply to this email directly, view it on GitHub > > > < > #2000 (comment)>, > > > > or unsubscribe > > > < > https://github.com/notifications/unsubscribe-auth/AAALYWH3AIJTLNYUVPE36UDYORBIJAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE2TK> > > > > . > > > You are receiving this because you commented.Message ID: > > > ***@***.*** > > > com> > > > > > > > —Reply to this email directly, view it on GitHub, or unsubscribe.You are > receiving this because you are subscribed to this thread.Message ID: > ***@***.***> > > — > Reply to this email directly, view it on GitHub > < #2000 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWF4NPUI6DFMO3GC4STYORCAZAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGE4DM> > . > You are receiving this because you commented.Message ID: > ***@***.*** > com> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#2000 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWFTLLXZPV6AMS2AP7LYORFPDAVCNFSM6AAAAABB2J3KBKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRWGI4TM> . You are receiving this because you commented.Message ID: ***@***.*** com>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

it's in % grade. no you don't need to change the override

i suggest to map correctly your touchscreen

[bco116]

Is that something you’d be able to assist with if I provide the iFit version?On Jan 16, 2024, at 11:21 PM, Roberto Viola ***@***.***> wrote: it's in % grade. no you don't need to change the override i suggest to map correctly your touchscreen —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[bco116]

Hi Roberto - I was able to successfully generate a screenshot, please see below:

[cagnulein]

ok thanks, i will check this in the next days!

[cagnulein]

@bco116 could you please tell me which is your firmware version of the treadmill and the specific treadmill version (share me a screenshot from the android settings of the tablet). So I will add a new settings in the qz companion with this exact name. Let me know!

[bco116]

I wasn't able to get adb-screenshot.bat to work tonight for some reason. The treadmill is a 2020 NordicTrack C1750, running iFit Cardio version 2.2.9.378. Here is a photo of the settings from the app:

[cagnulein]

new apk ready @bco116 https://github.com/cagnulein/QZCompanionNordictrackTreadmill/releases/download/3.3.30/QZCompanionNordictrackTreadmill.apk

set the new c1750 2020 setting and restart the treadmill
let me know if the coordinates are good now

[bco116]

Ok thanks, I’ll try it tonight!On Jan 17, 2024, at 11:50 AM, Roberto Viola ***@***.***> wrote: in order to do so you have to use the https://github.com/cagnulein/QZCompanionNordictrackTreadmill/blob/master/InstallPackage/adb-screenshot.bat contained here https://github.com/cagnulein/QZCompanionNordictrackTreadmill/archive/refs/tags/3.3.27.zip let me know if you need help —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[bco116]

I tried this last night, but I think the mapping is still a bit off. The manual incline +/- buttons in the QZ app would not respond unless I set the incline on the treadmill first. Once I did this, I could use the buttons in the app, but pressing the decrease button would still make the incline increase. Once the incline reached 4.5, the +/- buttons in the app no longer functionedOn Jan 24, 2024, at 3:47 AM, Roberto Viola ***@***.***> wrote: new apk ready @bco116 https://github.com/cagnulein/QZCompanionNordictrackTreadmill/releases/download/3.3.30/QZCompanionNordictrackTreadmill.apk set the new c1750 2020 setting and restart the treadmill let me know if the coordinates are good now —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[cagnulein]

ok i guess you have to validate the formula that I added here via adb

x1 = 75;
y1Inclination = 520 - (int) (QZService.lastInclinationFloat * 20);
y2 = y1Inclination - (int) ((reqInclination - QZService.lastInclinationFloat) * 20);

adb shell input swipe x1 y1Inclination x1 y2 200

are you able to test it via adb?