Support horizontal edc scaling in cp adapter extension

edc-extensions/control-plane-adapter/README.md

@@ -4,23 +4,36 @@ The goal of this extension is to simplify the process of retrieving data out of
 
 Additional requirements, that affects the architecture of the extension:
 - can return data both in SYNC and ASYNC mode (currently only SYNC endpoint available)
-- can be persistent, so that process can be restored from the point where it was before application was stopped (not implemented yet)  
-- prepared to scale horizontally (not yet implemented)
+- can be persistent, so that process can be restored from the point where it was before application was stopped  
+- scaling horizontally (when persistence is added to configuration)
 - can retry failed part of the process (no need to start the process from the beginning)
 
-<b>Configuration:</b>
+<h2><u>Configuration:</u></h2>
 
-| Key                                              | Description                                                                                                                                                                                     | Mandatory | Default |
-|:-------------------------------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|---------|
-| edc.cp.adapter.default.message.retry.number      | Number of retries of a message, in case of an error, within the internal process of retrieving DataReference                                                                                    | no   | 3       |
-| edc.cp.adapter.default.sync.request.timeout      | Timeout for synchronous request (in seconds), after witch 'timeout' error will be returned to the requesting client                                                                             | no   | 20      | 
-| edc.cp.adapter.messagebus.inmemory.thread.number | Number of threads running within the in-memory implementation of MessageBus                                                                                          _ _                        | no   | 10      |
-| edc.cp.adapter.reuse.contract.agreement          | Turn on/off reusing of existing contract agreements for the specific asset. Once the contract is agreed, the second request for the same asset will reuse the agreement. Value 1 = on, 0 = off. | no   | 1       |
-| edc.cp.adapter.cache.catalog.expire.after        | Number of seconds, after witch prevoiusly requested catalog will not be reused, and will be removed from catalog cache                                                                          | no   | 300     |
+| Key                                              | Description                                                                                                                                                                                                                            | Mandatory | Default |
+|:-------------------------------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|---------|
+| edc.cp.adapter.default.message.retry.number      | Number of retries of a message, in case of an error, within the internal process of retrieving DataReference                                                                                                                           | no   | 3       |
+| edc.cp.adapter.default.sync.request.timeout      | Timeout for synchronous request (in seconds), after witch 'timeout' error will be returned to the requesting client                                                                                                                    | no   | 20      | 
+| edc.cp.adapter.messagebus.inmemory.thread.number | Number of threads running within the in-memory implementation of MessageBus                                                                                          _ _                                                               | no   | 10      |
+| edc.cp.adapter.reuse.contract.agreement          | Turn on/off reusing of existing contract agreements for the specific asset. Once the contract is agreed, the second request for the same asset will reuse the agreement (if exists) pulled from the EDC. Value 1 = on, 0 = off. | no   | 1       |
+| edc.cp.adapter.cache.catalog.expire.after        | Number of seconds, after witch prevoiusly requested catalog will not be reused, and will be removed from catalog cache                                                                                                                 | no   | 300     |
 | edc.cp.adapter.catalog.request.limit             | Maximum number of items taken from Catalog within single request. Requests are repeated until all offers of the query are retrieved                                                             | no   | 100     |
 
+By default, the extension works in "IN MEMORY" mode. This setup has some limitations:
++ It can work only within single EDC instance. If CP-adapter requests are handled by more than one EDC, data flow may be broken.
++ If the EDC instance is restarted, all running processes are lost.
 
-<b>How to use it:</b>
+To run CP-Adapter in "PERSISTENT" mode, You need to create a proper tables with [this](docs/schema.sql) script, and add the following configuration values to Your control-plane EDC properties file:
+
+| Key                               | Description |
+|-----------------------------------|-------------|
+| edc.datasource.cpadapter.name     | data source name |
+| edc.datasource.cpadapter.url      | data source url |
+| edc.datasource.cpadapter.user     | data source user |
+| edc.datasource.cpadapter.password | data source password |
+
+
+<h2><u>How to use it:</u></h2>
 1. Client sends a GET request with two parameters: assetId and the url of the provider control-plane:
 
    ```
@@ -33,13 +46,14 @@ Additional requirements, that affects the architecture of the extension:
    http://localhost:9193/api/v1/data/adapter/asset/sync/123?providerUrl=http://localhost:8182/api/v1/ids/data
    ```
 
-   Oprional request parameters:
+   Optional request parameters, that overwrite the settings for a single request:
 
-   | Name                | Description                                                                                                                                                                                                             |
-   |-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---|
-   | contractAgreementId | Defines the ID of existing contract agreement, that should be reused for retrieving the asset. If parameter is specified, but contract is not found, 404 error will be returned.                                        |
+   | Name | Description                                                                                                                                                                                                             |
+   |--- |--- |
+   | contractAgreementId    | Defines the ID of existing contract agreement, that should be reused for retrieving the asset. If parameter is specified, but contract is not found, 404 error will be returned.                                        |
    | contractAgreementReuse | Similar to <i>edc.cp.adapter.reuse.contract.agreement</i> option allows to turn off reusing of existing contracts, but on a request level. Set the parameter value to '0' and new contract agrement will be negotiated. |
-
+   | timeout                | Similar to <i>edc.cp.adapter.default.sync.request.timeout</i>, defines the maximum time of the request. If data is not ready, time out error will be returned.                                                          |
+
    The controller is registered under the context alias of DataManagement API. The authentication depends on the DataManagement configuration.
    To find out more please visit:
 

edc-extensions/control-plane-adapter/docs/schema.sql

@@ -0,0 +1,55 @@
+--
+--  Copyright (c) 2022 ZF Friedrichshafen AG
+--
+--  This program and the accompanying materials are made available under the
+--  terms of the Apache License, Version 2.0 which is available at
+--  https://www.apache.org/licenses/LICENSE-2.0
+--
+--  SPDX-License-Identifier: Apache-2.0
+--
+--  Contributors:
+--       ZF Friedrichshafen AG - Initial SQL Query
+--
+
+-- Statements are designed for and tested with Postgres only!
+
+-- table: edc_cpadapter_queue
+
+CREATE TABLE IF NOT EXISTS edc_lease
+(
+    leased_by      VARCHAR NOT NULL,
+    leased_at      BIGINT,
+    lease_duration INTEGER NOT NULL,
+    lease_id       VARCHAR NOT NULL
+        CONSTRAINT lease_pk
+            PRIMARY KEY
+);
+
+CREATE TABLE IF NOT EXISTS edc_cpadapter_queue
+(
+    id                   VARCHAR NOT NULL,
+    created_at           BIGINT  NOT NULL,
+    channel              VARCHAR,
+    message              JSON,
+    invoke_after         BIGINT  NOT NULL,
+    lease_id             VARCHAR
+                         CONSTRAINT cpadapter_queue_lease_lease_id_fk
+                         REFERENCES edc_lease
+                         ON DELETE SET NULL,
+    PRIMARY KEY (id)
+);
+
+CREATE UNIQUE INDEX IF NOT EXISTS edc_cpadapter_queue_id_uindex
+    ON edc_cpadapter_queue (id);
+
+CREATE TABLE IF NOT EXISTS edc_cpadapter_object_store
+(
+    id                   VARCHAR NOT NULL,
+    created_at           BIGINT  NOT NULL,
+    type                 VARCHAR,
+    object               JSON,
+    PRIMARY KEY (id)
+);
+
+
+

edc-extensions/control-plane-adapter/pom.xml

@@ -115,6 +115,28 @@
             <artifactId>aggregate-service-spi</artifactId>
         </dependency>
 
+        <dependency>
+            <groupId>org.eclipse.edc</groupId>
+            <artifactId>sql-core</artifactId>
+        </dependency>
+        <dependency>
+            <groupId>org.eclipse.edc</groupId>
+            <artifactId>sql-lease</artifactId>
+            <version>${org.eclipse.edc.version}</version>
+        </dependency>
+        <dependency>
+            <groupId>org.eclipse.edc</groupId>
+            <artifactId>sql-pool-apache-commons</artifactId>
+        </dependency>
+        <dependency>
+            <groupId>org.eclipse.edc</groupId>
+            <artifactId>transaction-datasource-spi</artifactId>
+        </dependency>
+        <dependency>
+            <groupId>org.postgresql</groupId>
+            <artifactId>postgresql</artifactId>
+        </dependency>
+
         <!-- External Dependencies -->
         <dependency>
             <groupId>org.projectlombok</groupId>

edc-extensions/control-plane-adapter/src/main/java/org/eclipse/tractusx/edc/cp/adapter/ApiAdapterConfig.java

@@ -21,12 +21,24 @@ public class ApiAdapterConfig {
       "edc.cp.adapter.default.message.retry.number";
   private static final String DEFAULT_SYNC_REQUEST_TIMEOUT =
       "edc.cp.adapter.default.sync.request.timeout";
-  private static final String IN_MEMORY_MESSAGE_BUS_THREAD_NUMBER =
-      "edc.cp.adapter.messagebus.inmemory.thread.number";
   private static final String CATALOG_EXPIRE_AFTER_TIME =
       "edc.cp.adapter.cache.catalog.expire.after";
-  private static final String CATALOG_REQUEST_LIMIT = "edc.cp.adapter.catalog.request.limit";
   private static final String REUSE_CONTRACT_AGREEMENT = "edc.cp.adapter.reuse.contract.agreement";
+  private static final String CATALOG_REQUEST_LIMIT = "edc.cp.adapter.catalog.request.limit";
+
+  private static final String DATASOURCE_NAME = "edc.datasource.cpadapter.name";
+  private static final String DATASOURCE_URL = "edc.datasource.cpadapter.url";
+  private static final String DATASOURCE_USER = "edc.datasource.cpadapter.user";
+  private static final String DATASOURCE_PASS = "edc.datasource.cpadapter.password";
+
+  private static final String IN_MEMORY_MESSAGE_BUS_THREAD_NUMBER =
+      "edc.cp.adapter.messagebus.inmemory.thread.number";
+  private static final String SQL_MESSAGE_BUS_THREAD_NUMBER =
+      "edc.cp.adapter.messagebus.sql.thread.number";
+  private static final String SQL_MESSAGE_BUS_MAX_DELIVERY =
+      "edc.cp.adapter.messagebus.sql.max.delivery";
+  private static final String SQL_MESSAGE_BUS_DELIVERY_INTERVAL =
+      "edc.cp.adapter.messagebus.sql.max.delivery";
 
   private final ServiceExtensionContext context;
 
@@ -51,10 +63,38 @@ public boolean isContractAgreementReuseOn() {
   }
 
   public int getCatalogExpireAfterTime() {
-    return context.getSetting(CATALOG_EXPIRE_AFTER_TIME, 3600);
+    return context.getSetting(CATALOG_EXPIRE_AFTER_TIME, 180);
   }
 
   public int getCatalogRequestLimit() {
     return context.getSetting(CATALOG_REQUEST_LIMIT, 100);
   }
+
+  public String getDataSourceName() {
+    return context.getSetting(DATASOURCE_NAME, "cpadapter");
+  }
+
+  public String getDataSourceUrl() {
+    return context.getSetting(DATASOURCE_URL, null);
+  }
+
+  public String getDataSourceUser() {
+    return context.getSetting(DATASOURCE_USER, null);
+  }
+
+  public String getDataSourcePass() {
+    return context.getSetting(DATASOURCE_PASS, null);
+  }
+
+  public int getSqlMessageBusThreadNumber() {
+    return context.getSetting(SQL_MESSAGE_BUS_THREAD_NUMBER, 10);
+  }
+
+  public int getSqlMessageBusMaxDelivery() {
+    return context.getSetting(SQL_MESSAGE_BUS_MAX_DELIVERY, 10);
+  }
+
+  public int getSqlMessageBusDeliveryInterval() {
+    return context.getSetting(SQL_MESSAGE_BUS_DELIVERY_INTERVAL, 1);
+  }
 }