This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering

Designing, building and controlling a motorized prosthetic arm

A documentation automation system for SaMD and medical device software. Documentation-as-code for ISO62304 compliant development processes.

My undergraduate honours project on paper-based microfluidics for animal disease detection

Smart Wearable Device for Reduction of Parkinson’s Disease Hand-Tremor

This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering

Emergency Ventilator-Sharing System. A system using standard ventilation circuit parts and localy-manufacturable custom components to allow the use of a single ventilator to support two patients with independent control of tidal volume, FiO2, and PEEP for each patient.

Source for the controller interface for BiVAD project on the BeagleBone Black. This repository will contain testing programs and any other peripheral functionality required by testing or updated by Customer Requirements.

Automated Reactive Accelerated Aging for Rapid In Vitro Evaluation of Neural Implants Performance

The objective of our project is to use electromyography (EMG) in order to classify different hand gestures. EMG is a technique for evaluating and recording the electrical activity produced skeletal muscles. We used double channel surface electrodes to record EMG, with 3 electrodes per channel, one for ground and 2 for the differential input. We …

This project creates a simple electrospinning syringe pump that incorporates an Arduino and motor.

A handheld external compression device to facilitate computed tomography (CT)-fluoroscopy-guided percutaneous interventions in the abdomen.

Electronic device for wrist rehabilitation

A system for suggesting alternative medical devices based on FDA classification api.

Vue / Vue Formulate-Validation, wrapped in 11ty and webhooks to API CRUD managers and live update CRM tool workflow

Generates medical device alarms as .wav files according to FDA standards

Project code for my MRes research. It involves sensors using the Nordic BLE chip, android app development and embedded system programming in C. These collaborated together and also with matlab to design a system for STO2 sensor validation, calibration and testing with regards to monitoring Diabetic Peripheral Neuropathy. Basically medical device…

This project creates a simple urinary catheter that incorporates a distance sensor and water sensor.

This repository contains the code and documents for my master’s thesis “Assessment of the accuracy and reliability of heart rate and blood oxygen saturation measurement in wearable devices". The thesis was written by Antoni López under the supervision of Juan José Ramos Castro at the Polytechnic University of Catalonia.